文档章节

问题解决了

zyh19851025
 zyh19851025
发布于 2011/01/19 10:08
字数 1466
阅读 1.3K
收藏 3

行业解决方案、产品招募中!想赚钱就来传!>>>

这几天在看opensips和radius联合作sip客户端的计费,遇到了个问题,在通话开始的时候,radius服务器可以收到消息,计费开始,但是计费结束的时候,radius服务器没有任何反应,查了很多资料,也发了不少的帖子,可就是少有人回答,现在问题终于解决了,原来是这样的:

####### Global Parameters #########

debug=3
log_stderror=no
log_facility=LOG_LOCAL0

fork=yes
children=4

/* uncomment the following lines to enable debugging */
#debug=6
#fork=no
#log_stderror=yes

/* uncomment the next line to disable TCP (default on) */
#disable_tcp=yes

/* uncomment the next line to enable the auto temporary blacklisting of
   not available destinations (default disabled) */
#disable_dns_blacklist=no

/* uncomment the next line to enable IPv6 lookup after IPv4 dns
   lookup failures (default disabled) */
#dns_try_ipv6=yes

/* uncomment the next line to disable the auto discovery of local aliases
   based on revers DNS on IPs (default on) */
#auto_aliases=no

/* uncomment the following lines to enable TLS support  (default off) */
#disable_tls = no
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/opensips/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/opensips/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/opensips/tls/user/user-calist.pem"


port=5060

/* uncomment and configure the following line if you want opensips to
   bind on a specific interface/port/proto (default bind on all available) */
listen=udp:192.168.118.39:5060


####### Modules Section ########

#set module path
mpath="/usr/local/lib/opensips/modules/"

/* uncomment next line for MySQL DB support */

loadmodule "db_mysql.so"
loadmodule "signaling.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"
loadmodule "uri.so"
loadmodule "acc.so"
#loadmodule "uri_db.so"
/* uncomment next lines for MySQL based authentication support
   NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "auth.so"
loadmodule "auth_db.so"
/* uncomment next line for aliases support
   NOTE: a DB (like db_mysql) module must be also loaded */
#loadmodule "alias_db.so"
/* uncomment next line for multi-domain support
   NOTE: a DB (like db_mysql) module must be also loaded
   NOTE: be sure and enable multi-domain support in all used modules
         (see "multi-module params" section ) */
#loadmodule "domain.so"
/* uncomment the next two lines for presence server support
   NOTE: a DB (like db_mysql) module must be also loaded */
#loadmodule "presence.so"
#loadmodule "presence_xml.so"
loadmodule "aaa_radius.so"

# ----------------- setting module-specific parameters ---------------

# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")


# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)


# ----- registrar params -----
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)


# ----- usrloc params -----
modparam("usrloc", "db_mode",   0)
/* uncomment the following lines if you want to enable DB persistency
   for location entries */
#modparam("usrloc", "db_mode",   2)
#modparam("usrloc", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")


# ----- uri params -----
modparam("uri", "use_uri_table", 0)


# ----- acc params -----
/* what sepcial events should be accounted ? */
#modparam("acc", "early_media", 0)
modparam("acc", "report_ack", 1)
modparam("acc", "report_cancels", 1)
/* by default ww do not adjust the direct of the sequential requests.
   if you enable this parameter, be sure the enable "append_fromtag"
   in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
#modparam("acc","radius_flag",3)
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
/* uncomment the following lines to enable DB accounting also */
#modparam("acc", "db_flag", 1)
#modparam("acc", "db_missed_flag", 2)
modparam("acc","aaa_flag",2)
modparam("acc","aaa_missed_flag",3)
modparam("acc","service_type",15)
#modparam("aaa_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf")
modparam("acc","aaa_url","radius:/usr/local/etc/radiusclient-ng/radiusclient.conf")
modparam("acc", "aaa_extra",    "User-Name=$Au ;\
                                                      Calling-Station-Id=$from;\
                                                     Called-Station-Id=$to ;\
                                                      Sip-Translated-Request-URI=$ruri;\
                                                      Sip-RPid=$avp(s:rpid);\
                                                      Canonical-URI=$avp(s:can_uri);\
                                                     Billing-Party=$avp(s:billing_party);\
                                                      Divert-Reason=$avp(s:divert_reason);\
                                                      X-RTP-Stat=$hdr(X-RTP-Stat);\
                                                      Event=$hdr(event);\
                                                      SIP-Proxy-IP=$avp(s:sip_proxy_ip);\
                                                     ENUM-TLD=$avp(s:enum_tld)") 
# ----- auth_db params -----
/* uncomment the following lines if you want to enable the DB based
   authentication */
#modparam("auth_db", "calculate_ha1", yes)
#modparam("auth_db", "password_column", "password")
#modparam("auth_db", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")
#modparam("auth_db", "load_credentials", "")


# ----- alias_db params -----
/* uncomment the following lines if you want to enable the DB based
   aliases */
#modparam("alias_db", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")


# ----- domain params -----
/* uncomment the following lines to enable multi-domain detection
   support */
#modparam("domain", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")
#modparam("domain", "db_mode", 1)   # Use caching


# ----- multi-module params -----
/* uncomment the following line if you want to enable multi-domain support
   in the modules (dafault off) */
#modparam("auth_db|usrloc|uri", "use_domain", 1)


# ----- presence params -----
/* uncomment the following lines if you want to enable presence */
#modparam("presence|presence_xml", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")
#modparam("presence_xml", "force_active", 1)
#modparam("presence", "server_address", "sip:192.168.1.2:5060")


####### Routing Logic ########


# main request routing logic

route{
 if (!mf_process_maxfwd_header("10")) {
  sl_send_reply("483","Too Many Hops");
  exit;
 }

 if (has_totag()) {
  # sequential request withing a dialog should
  # take the path determined by record-routing
  if (loose_route()) {
   if (is_method("BYE")) {
  #    acc_rad_request("BYE"); #// This is sending an Bye to the radius server to create the stop time.
    setflag(2); # do accounting ...
    #setflag(3); # ... even if the transaction fails
   } else if (is_method("INVITE")) {
    # even if in most of the cases is useless, do RR for
    # re-INVITEs alos, as some buggy clients do change route set
    # during the dialog.
    record_route();
   }
   # route it out to whatever destination was set by loose_route()
   # in $du (destination URI).
   route(1);
  } else {
   /* uncomment the following lines if you want to enable presence */
   ##if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") {
   ## # in-dialog subscribe requests
   ## route(2);
   ## exit;
   ##}
   if ( is_method("ACK") ) {
    if ( t_check_trans() ) {
     # non loose-route, but stateful ACK; must be an ACK after
     # a 487 or e.g. 404 from upstream server
     t_relay();
     exit;
    } else {
     # ACK without matching transaction ->
     # ignore and discard
     exit;
    }
   }
   sl_send_reply("404","Not here");
  }
  exit;
 }

 #initial requests

 # CANCEL processing
 if (is_method("CANCEL"))
 {
  if (t_check_trans())
   t_relay();
  exit;
 }

 t_check_trans();

 # authenticate if from local subscriber (uncomment to enable auth)
 # authenticate all initial non-REGISTER request that pretend to be
 # generated by local subscriber (domain from FROM URI is local)
 ##if (!(method=="REGISTER") && from_uri==myself) /*no multidomain version*/
 ##if (!(method=="REGISTER") && is_from_local())  /*multidomain version*/
 ##{
 ## if (!proxy_authorize("", "subscriber")) {
 ##  proxy_challenge("", "0");
 ##  exit;
 ## }
 ## if (!db_check_from()) {
 ##  sl_send_reply("403","Forbidden auth ID");
 ##  exit;
 ## }
 ##
 ## consume_credentials();
 ## # caller authenticated
 ##}

 # preloaded route checking
 if (loose_route()) {
  xlog("L_ERR",
  "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
  if (!is_method("ACK"))
   sl_send_reply("403","Preload Route denied");
  exit;
 }

 # record routing
 if (!is_method("REGISTER|MESSAGE"))
  record_route();

 # account only INVITEs
 if (is_method("INVITE")) {
  setflag(1); # do accounting
 }
 if (!uri==myself)
 ## replace with following line if multi-domain support is used
 ##if (!is_uri_host_local())
 {
  append_hf("P-hint: outbound\r\n");
  # if you have some interdomain connections via TLS
  ##if($rd=="tls_domain1.net") {
  ## t_relay("tls:domain1.net");
  ## exit;
  ##} else if($rd=="tls_domain2.net") {
  ## t_relay("tls:domain2.net");
  ## exit;
  ##}
  route(1);
 }

 # requests for my domain

 ## uncomment this if you want to enable presence server
 ##   and comment the next 'if' block
 ##   NOTE: uncomment also the definition of route[2] from  below
 ##if( is_method("PUBLISH|SUBSCRIBE"))
 ##  route(2);

 if (is_method("PUBLISH"))
 {
  sl_send_reply("503", "Service Unavailable");
  exit;
 }
 

 if (is_method("REGISTER"))
 {
  # authenticate the REGISTER requests (uncomment to enable auth)
  #if (!www_authorize("", "subscriber"))  
  #{
  # www_challenge("", "0");
  # exit;
  #}
  
  ##if (!db_check_to())
  ##{
  ## sl_send_reply("403","Forbidden auth ID");
  ## exit;
  ##}

  if (!save("location"))
   sl_reply_error();

  exit;
 }

 if ($rU==NULL) {
  # request with no Username in RURI
  sl_send_reply("484","Address Incomplete");
  exit;
 }

 # apply DB based aliases (uncomment to enable)
 ##alias_db_lookup("dbaliases");

 # do lookup with method filtering
 if (!lookup("location","m")) {
  switch ($retcode) {
   case -1:
   case -3:
    t_newtran();
    t_reply("404", "Not Found");
    exit;
   case -2:
    sl_send_reply("405", "Method Not Allowed");
    exit;
  }
 }

 # when routing via usrloc, log the missed calls also
 setflag(2);

 route(1);
}


route[1] {
 # for INVITEs enable some additional helper routes
 if (is_method("INVITE")) {
  t_on_branch("2");
  t_on_reply("2");
  t_on_failure("1");
 }

 if (!t_relay()) {
  sl_reply_error();
 };
 exit;
}


# Presence route
/* uncomment the whole following route for enabling presence
   NOTE: do not forget to enable the call of this route from the main
     route */
##route[2]
##{
## if (!t_newtran())
## {
##  sl_reply_error();
##  exit;
## };
##
## if(is_method("PUBLISH"))
## {
##  handle_publish();
## }
## else
## if( is_method("SUBSCRIBE"))
## {
##  handle_subscribe();
## }
##
## exit;
##}


branch_route[2] {
 xlog("new branch at $ru\n");
}


onreply_route[2] {
 xlog("incoming reply\n");
}


failure_route[1] {
 if (t_was_cancelled()) {
  exit;
 }

 # uncomment the following lines if you want to block client
 # redirect based on 3xx replies.
 ##if (t_check_status("3[0-9][0-9]")) {
 ##t_reply("404","Not found");
 ## exit;
 ##}

 # uncomment the following lines if you want to redirect the failed
 # calls to a different new destination
 ##if (t_check_status("486|408")) {
 ## sethostport("192.168.2.100:5060");
 ## # do not set the missed call flag again
 ## t_relay();
 ##}
}

 

就是文中标成红色的两行,计费结束时设置的flag标志位应该和modparam中设置的modparam("acc","aaa_flag",2)aaa_flag的值相同,哈哈!!!

zyh19851025
粉丝 4
博文 7
码字总数 3545
作品 0
天津
私信 提问
加载中
请先登录后再评论。
访问安全控制解决方案

本文是《轻量级 Java Web 框架架构设计》的系列博文。 今天想和大家简单的分享一下,在 Smart 中是如何做到访问安全控制的。也就是说,当没有登录或 Session 过期时所做的操作,会自动退回到...

黄勇
2013/11/03
3.4K
6
服务器自动化任务解决方案--Huginn

Huginn 是雅虎开发的一个系统,可以帮你执行自动化的在线任务。可以阅读网页,关注事件,并采取相应操作。Huginn 通过一个直观的事件流图来展示各种操作和事件。通过在你自己的服务器上的管道加...

匿名
2013/03/15
1.7W
0
端口映射程序--PS320

PS320 V0.12 版本为开源版本 本程序最初想解决自己管理服务器问题,当初因客户不对外开放端口,导致管理工作量大,速度慢且不稳定,每次管理都去现场处理。 本程序提供端口映射功能,可以直接...

冰迪
2013/06/03
2.1K
0
Android防火墙软件--imiPhonewall

艾米防火墙是一款Android下的防火墙软件,它主要用来帮助手机用户解决日常使用中遇到的问题:电话骚扰,钓鱼短信,手机垃圾,系统变慢等众多问题,艾米防火墙暂时只支持短信过滤,来电拦截,程...

imiyoo
2013/06/07
1K
0
【OSChina Android客户端设计】界面原型代码问题

看到大家说希望能把代码分享出来,实在令我不安。因为这些代码根本就是非常粗糙的原始设计,但既然有这个要求,那么就考虑吧。 目前,客户端设计还仅仅处在界面原型的设计和讨论定位的阶段,...

BarryWey
2011/05/10
439
3

没有更多内容

加载失败,请刷新页面

加载更多

【Python成长之路】对不起,今天的所有红包我都要抢走了

哈喽大家好,我是鹏哥。 今天要记录的内容是 —— 用python完成微信抢红包。 ~~~上课铃~~~ 1 写在前面 哈哈,今天的歌曲是过年必备款(主要是我懒得找适应节奏的流行歌)。向来对春晚不感冒的...

鹏哥贼优秀
01/24
0
0
说说TCP的拥塞控制

在某段时间,若对网络中某一资源的需求超过了该资源所能提供的可用部分,网络的性能就要变坏。这种情况就叫拥塞。拥塞控制就是为了防止过多的数据注入到网络中,这样就可以使网络中的路由器或...

Java学习提升
05/29
0
0
高并发下接口幂等性解决方案

点击上方☝ Java编程技术乐园,轻松关注! 及时获取有趣有料的技术文章 作者:抽离的心 https://blog.csdn.net/u011635492/article/details/81058153 一、背景 我们实际系统中有很多操作,是...

阿飞云
02/05
0
0
树莓派4B安装tensorflow2.0

这个GitHub上可以下载到tensorflow2.x:https://github.com/lhelontra/tensorflow-on-arm/releases 我就拿我下载的举例子吧:我下载的是这个版本的:tensorflow-2.0.0-cp37-none-linux_armv...

osc_f9krav3q
15分钟前
0
0
SpringBoot + Mybatis 多模块( module )项目搭建教程

来自:枫本非凡 | 责编:乐乐 链接:cnblogs.com/orzlin/p/9717399.html 粉丝福利,点击领取:教妹子手撸了50个项目实战后,我住院了…… 一、前言 最近公司项目准备开始重构,框架选定为Spr...

倪升武
07/12
0
0

没有更多内容

加载失败,请刷新页面

加载更多

返回顶部
顶部