【Nginx】实现负载均衡、限流、缓存、黑白名单和灰度发布,这是最全的一篇了!

2020/07/22 12:00
阅读数 646


转自:冰河技术  作者:冰河团队    

Nginx安装

注意:这里以CentOS 6.8服务器为例,以root用户身份来安装Nginx。

1.安装依赖环境

yum -y install wget gcc-c++ ncurses ncurses-devel cmake make perl bison openssl openssl-devel gcc* libxml2 libxml2-devel curl-devel libjpeg* libpng* freetype* autoconf automake zlib* fiex* libxml* libmcrypt* libtool-ltdl-devel* libaio libaio-devel  bzr libtool

2.安装openssl

wget https://www.openssl.org/source/openssl-1.0.2s.tar.gz
tar -zxvf openssl-1.0.2s.tar.gz
cd /usr/local/src/openssl-1.0.2s
./config --prefix=/usr/local/openssl-1.0.2s
make
make install

3.安装pcre

wget https://ftp.pcre.org/pub/pcre/pcre-8.43.tar.gz
tar -zxvf pcre-8.43.tar.gz
cd /usr/local/src/pcre-8.43
./configure --prefix=/usr/local/pcre-8.43
make
make install

4.安装zlib

wget https://sourceforge.net/projects/libpng/files/zlib/1.2.11/zlib-1.2.11.tar.gz
tar -zxvf zlib-1.2.11.tar.gz
cd /usr/local/src/zlib-1.2.11
./configure --prefix=/usr/local/zlib-1.2.11
make
make

5.安装Nginx

wget http://nginx.org/download/nginx-1.17.2.tar.gz
tar -zxvf nginx-1.17.2.tar.gz
cd /usr/local/src/nginx-1.17.2
./configure --prefix=/usr/local/nginx-1.17.2 --with-openssl=/usr/local/src/openssl-1.0.2s --with-pcre=/usr/local/src/pcre-8.43 --with-zlib=/usr/local/src/zlib-1.2.11 --with-http_ssl_module
make
make install

这里需要注意的是:安装Nginx时,指定的是openssl、pcre和zlib的源码解压目录,安装完成后Nginx配置文件的完整路径为:/usr/local/nginx-1.17.2/conf/nginx.conf。

Nginx负载均衡配置

1.负载均衡配置

http {
       ……
    upstream real_server {
       server 192.168.103.100:2001 weight=1;  #轮询服务器和访问权重
       server 192.168.103.100:2002 weight=2;
    }

    server {
        listen  80;

        location / {
            proxy_pass http://real_server;
        }
    }
}

2.失败重试配置

upstream real_server {
   server 192.168.103.100:2001 weight=1 max_fails=2 fail_timeout=60s;
   server 192.168.103.100:2002 weight=2 max_fails=2 fail_timeout=60s;
}

意思是在fail_timeout时间内失败了max_fails次请求后,则认为该上游服务器不可用,然后将该服务地址踢除掉。fail_timeout时间后会再次将该服务器加入存活列表,进行重试。

Nginx限流配置

1.配置参数

limit_req_zone指令设置参数

limit_req_zone $binary_remote_addr zone=mylimit:10m rate=10r/s;
  • limit_req_zone定义在http块中,$binary_remote_addr表示保存客户端IP地址的二进制形式。

  • Zone定义IP状态及URL访问频率的共享内存区域。zone=keyword标识区域的名字,以及冒号后面跟区域大小。16000个IP地址的状态信息约1MB,所以示例中区域可以存储160000个IP地址。

  • Rate定义最大请求速率。示例中速率不能超过每秒10个请求。

2.设置限流

location / {
        limit_req zone=mylimit burst=20 nodelay;
        proxy_pass http://real_server;
}

burst排队大小,nodelay不限制单个请求间的时间。

3.不限流白名单

geo $limit {
default              1;
192.168.2.0/24  0;
}

map $limit $limit_key {
$binary_remote_addr;
"";
}

limit_req_zone $limit_key zone=mylimit:10m rate=1r/s;

location / {
        limit_req zone=mylimit burst=1 nodelay;
        proxy_pass http://real_server;
}

上述配置中,192.168.2.0/24网段的IP访问是不限流的,其他限流。

IP后面的数字含义:

  • 24表示子网掩码:255.255.255.0

  • 16表示子网掩码:255.255.0.0

  • 8表示子网掩码:255.0.0.0

Nginx缓存配置

1.浏览器缓存

静态资源缓存用expire

location ~*  .(jpg|jpeg|png|gif|ico|css|js)$ {
   expires 2d;
}

Response Header中添加了Expires和Cache-Control,

静态资源包括(一般缓存)

  • 普通不变的图像,如logo,图标等

  • js、css静态文件

  • 可下载的内容,媒体文件

协商缓存(add_header ETag/Last-Modified value)

  • HTML文件

  • 经常替换的图片

  • 经常修改的js、css文件

  • 基本不变的API接口

不需要缓存

  • 用户隐私等敏感数据

  • 经常改变的api数据接口

2.代理层缓存

//缓存路径,inactive表示缓存的时间,到期之后将会把缓存清理
proxy_cache_path /data/cache/nginx/ levels=1:2 keys_zone=cache:512m inactive = 1d max_size=8g;

location / {
    location ~ \.(htm|html)?$ {
        proxy_cache cache;
        proxy_cache_key    $uri$is_args$args;     //以此变量值做HASH,作为KEY
        //HTTP响应首部可以看到X-Cache字段,内容可以有HIT,MISS,EXPIRES等等
        add_header X-Cache $upstream_cache_status;
        proxy_cache_valid 200 10m;
        proxy_cache_valid any 1m;
        proxy_pass  http://real_server;
        proxy_redirect     off;
    }
    location ~ .*\.(gif|jpg|jpeg|bmp|png|ico|txt|js|css)$ {
        root /data/webapps/edc;
        expires      3d;
        add_header Static Nginx-Proxy;
    }
}

在本地磁盘创建一个文件目录,根据设置,将请求的资源以K-V形式缓存在此目录当中,KEY需要自己定义(这里用的是url的hash值),同时可以根据需要指定某内容的缓存时长,比如状态码为200缓存10分钟,状态码为301,302的缓存5分钟,其他所有内容缓存1分钟等等。
可以通过purger的功能清理缓存。

AB测试/个性化需求时应禁用掉浏览器缓存。

Nginx黑名单

1.一般配置

location / {
    deny  192.168.1.1;
    deny 192.168.1.0/24;
    allow 10.1.1.0/16;
    allow 2001:0db8::/32;
    deny  all;
}

2. Lua+Redis动态黑名单(OpenResty)

安装运行

yum install yum-utils
yum-config-manager --add-repo https://openresty.org/package/centos/openresty.repo
yum install openresty
yum install openresty-resty
查看
yum --disablerepo="*" --enablerepo="openresty" list available
运行
service openresty start

配置(/usr/local/openresty/nginx/conf/nginx.conf)

lua_shared_dict ip_blacklist 1m;

server {
    listen  80;

    location / {
        access_by_lua_file lua/ip_blacklist.lua;
        proxy_pass http://real_server;
    }
}

lua脚本(ip_blacklist.lua)

local redis_host    = "192.168.1.132"
local redis_port    = 6379
local redis_pwd     = 123456
local redis_db = 2

-- connection timeout for redis in ms.
local redis_connection_timeout = 100

-- a set key for blacklist entries
local redis_key     = "ip_blacklist"

-- cache lookups for this many seconds
local cache_ttl     = 60

-- end configuration

local ip                = ngx.var.remote_addr
local ip_blacklist      = ngx.shared.ip_blacklist
local last_update_time  = ip_blacklist:get("last_update_time");

-- update ip_blacklist from Redis every cache_ttl seconds:
if last_update_time == nil or last_update_time < ( ngx.now() - cache_ttl ) then

  local redis = require "resty.redis";
  local red = redis:new();

  red:set_timeout(redis_connect_timeout);

  local ok, err = red:connect(redis_host, redis_port);
  if not ok then
    ngx.log(ngx.ERR, "Redis connection error while connect: " .. err);
  else
    local ok, err = red:auth(redis_pwd)
    if not ok then
      ngx.log(ngx.ERR, "Redis password error while auth: " .. err);
    else
        local new_ip_blacklist, err = red:smembers(redis_key);
        if err then
            ngx.log(ngx.ERR, "Redis read error while retrieving ip_blacklist: " .. err);
        else
        ngx.log(ngx.ERR, "Get data success:" .. new_ip_blacklist)
          -- replace the locally stored ip_blacklist with the updated values:
            ip_blacklist:flush_all();
          for index, banned_ip in ipairs(new_ip_blacklist) do
            ip_blacklist:set(banned_ip, true);
          end
          -- update time
          ip_blacklist:set("last_update_time", ngx.now());
      end
    end
  end
end

if ip_blacklist:get(ip) then
  ngx.log(ngx.ERR, "Banned IP detected and refused access: " .. ip);
  return ngx.exit(ngx.HTTP_FORBIDDEN);
end

Nginx灰度发布

1.根据Cookie实现灰度发布

根据Cookie查询version值,如果该version值为v1转发到host1,为v2转发到host2,都不匹配的情况下转发到默认配置。

upstream host1 {
   server 192.168.2.46:2001 weight=1;  #轮询服务器和访问权重
   server 192.168.2.46:2002 weight=2;
}

upstream host2 {
   server 192.168.1.155:1111  max_fails=1 fail_timeout=60;
}

upstream default {
   server 192.168.1.153:1111  max_fails=1 fail_timeout=60;
}

map $COOKIE_version $group {
   ~*v1$ host1;
   ~*v2$ host2;
   default default;
}

lua_shared_dict ip_blacklist 1m;

server {
    listen  80;

    #set $group "default";
    #if ($http_cookie ~* "version=v1"){
    #    set $group host1;
    #}
    #if ($http_cookie ~* "version=v2"){
    #    set $group host2;
    #}

    location / {
        access_by_lua_file lua/ip_blacklist.lua;
        proxy_pass http://$group;
    }
}

2.根据来路IP实现灰度发布

server {
  ……………
  set $group default;
  if ($remote_addr ~ "192.168.119.1") {
      set $group host1;
  }
  if ($remote_addr ~ "192.168.119.2") {
      set $group host2;
  }

3.更细粒度灰度发布

参考:

https://github.com/sunshinelyz/ABTestingGateway

好了,咱们今天就聊到这儿吧!别忘了给个在看和转发,让更多的人看到,一起学习一起进步!!

相关推荐



后台回复 学习资料 领取学习视频


如有收获,点个在看,诚挚感谢

本文分享自微信公众号 - 猿天地(cxytiandi)。
如有侵权,请联系 support@oschina.cn 删除。
本文参与“OSC源创计划”,欢迎正在阅读的你也加入,一起分享。

展开阅读全文
加载中
点击引领话题📣 发布并加入讨论🔥
打赏
0 评论
4 收藏
0
分享
返回顶部
顶部