文档章节

windows搭建kafka伪集群

聆风阁主
 聆风阁主
发布于 03/29 12:41
字数 3384
阅读 12
收藏 0

注:本次搭建 kafka 伪集群依赖 zookeeper 集群,请先搭建好 zookeeper 集群

一、规划 kafka 伪集群端口

主机IP:127.0.0.1

消息端口:9091;9092;9093

zookeeper消息端口:2181;2182;2183

二、解压 kafka_2.12-2.1.1.tgz 到指定目录

三、分别修改 config 目录下的 server.properties 配置文件

C:\kafka_2.12-2.1.1\kafka_2.12-2.1.1-9091\config\server.properties

# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# see kafka.server.KafkaConfig for additional details and defaults

############################# Server Basics #############################

# The id of the broker. This must be set to a unique integer for each broker.
# 修改集群节点编号, 同一集群中所有节点的值不能相同
broker.id=1

############################# Socket Server Settings #############################

# The address the socket server listens on. It will get the value returned from 
# java.net.InetAddress.getCanonicalHostName() if not configured.
#   FORMAT:
#     listeners = listener_name://host_name:port
#   EXAMPLE:
#     listeners = PLAINTEXT://your.host.name:9092
#listeners=PLAINTEXT://:9092
# 配置Socket服务器监听地址
listeners=PLAINTEXT://127.0.0.1:9091

# Hostname and port the broker will advertise to producers and consumers. If not set, 
# it uses the value for "listeners" if configured.  Otherwise, it will use the value
# returned from java.net.InetAddress.getCanonicalHostName().
#advertised.listeners=PLAINTEXT://your.host.name:9092
# 配置broker通知producer和consumer的服务地址, 如果没设置则用listeners的值
advertised.listeners=PLAINTEXT://127.0.0.1:9091

# Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details
#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL

# The number of threads that the server uses for receiving requests from the network and sending responses to the network
num.network.threads=3

# The number of threads that the server uses for processing requests, which may include disk I/O
num.io.threads=8

# The send buffer (SO_SNDBUF) used by the socket server
socket.send.buffer.bytes=102400

# The receive buffer (SO_RCVBUF) used by the socket server
socket.receive.buffer.bytes=102400

# The maximum size of a request that the socket server will accept (protection against OOM)
socket.request.max.bytes=104857600


############################# Log Basics #############################

# A comma separated list of directories under which to store log files
# 配置日志存储位置
log.dirs=C:/kafka_2.12-2.1.1/kafka_2.12-2.1.1-9091/logs

# The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
# topic默认分区个数
num.partitions=1

# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
num.recovery.threads.per.data.dir=1

############################# Internal Topic Settings  #############################
# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"
# For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3.
# 设置保存副本数为3, 这样宕机一台还能继续消费
offsets.topic.replication.factor=3
transaction.state.log.replication.factor=1
transaction.state.log.min.isr=1

############################# Log Flush Policy #############################

# Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# There are a few important trade-offs here:
#    1. Durability: Unflushed data may be lost if you are not using replication.
#    2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
#    3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to excessive seeks.
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.

# The number of messages to accept before forcing a flush of data to disk
#log.flush.interval.messages=10000

# The maximum amount of time a message can sit in a log before we force a flush
#log.flush.interval.ms=1000

############################# Log Retention Policy #############################

# The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.

# The minimum age of a log file to be eligible for deletion due to age
log.retention.hours=168

# A size-based retention policy for logs. Segments are pruned from the log unless the remaining
# segments drop below log.retention.bytes. Functions independently of log.retention.hours.
#log.retention.bytes=1073741824

# The maximum size of a log segment file. When this size is reached a new log segment will be created.
log.segment.bytes=1073741824

# The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
log.retention.check.interval.ms=300000

############################# Zookeeper #############################

# Zookeeper connection string (see zookeeper docs for details).
# This is a comma separated host:port pairs, each corresponding to a zk
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
# 配置zookeeper集群访问地址
zookeeper.connect=127.0.0.1:2181,127.0.0.1:2182,127.0.0.1:2183

# Timeout in ms for connecting to zookeeper
zookeeper.connection.timeout.ms=6000


############################# Group Coordinator Settings #############################

# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance.
# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms.
# The default value for this is 3 seconds.
# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing.
# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup.
group.initial.rebalance.delay.ms=0

C:\kafka_2.12-2.1.1\kafka_2.12-2.1.1-9092\config\server.properties

# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# see kafka.server.KafkaConfig for additional details and defaults

############################# Server Basics #############################

# The id of the broker. This must be set to a unique integer for each broker.
# 修改集群节点编号, 同一集群中所有节点的值不能相同
broker.id=2

############################# Socket Server Settings #############################

# The address the socket server listens on. It will get the value returned from 
# java.net.InetAddress.getCanonicalHostName() if not configured.
#   FORMAT:
#     listeners = listener_name://host_name:port
#   EXAMPLE:
#     listeners = PLAINTEXT://your.host.name:9092
#listeners=PLAINTEXT://:9092
# 配置Socket服务器监听地址
listeners=PLAINTEXT://127.0.0.1:9092

# Hostname and port the broker will advertise to producers and consumers. If not set, 
# it uses the value for "listeners" if configured.  Otherwise, it will use the value
# returned from java.net.InetAddress.getCanonicalHostName().
#advertised.listeners=PLAINTEXT://your.host.name:9092
# 配置broker通知producer和consumer的服务地址, 如果没设置则用listeners的值
advertised.listeners=PLAINTEXT://127.0.0.1:9092

# Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details
#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL

# The number of threads that the server uses for receiving requests from the network and sending responses to the network
num.network.threads=3

# The number of threads that the server uses for processing requests, which may include disk I/O
num.io.threads=8

# The send buffer (SO_SNDBUF) used by the socket server
socket.send.buffer.bytes=102400

# The receive buffer (SO_RCVBUF) used by the socket server
socket.receive.buffer.bytes=102400

# The maximum size of a request that the socket server will accept (protection against OOM)
socket.request.max.bytes=104857600


############################# Log Basics #############################

# A comma separated list of directories under which to store log files
# 配置日志存储位置
log.dirs=C:/kafka_2.12-2.1.1/kafka_2.12-2.1.1-9092/logs

# The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
# topic默认分区个数
num.partitions=1

# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
num.recovery.threads.per.data.dir=1

############################# Internal Topic Settings  #############################
# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"
# For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3.
# 设置保存副本数为3, 这样宕机一台还能继续消费
offsets.topic.replication.factor=3
transaction.state.log.replication.factor=1
transaction.state.log.min.isr=1

############################# Log Flush Policy #############################

# Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# There are a few important trade-offs here:
#    1. Durability: Unflushed data may be lost if you are not using replication.
#    2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
#    3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to excessive seeks.
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.

# The number of messages to accept before forcing a flush of data to disk
#log.flush.interval.messages=10000

# The maximum amount of time a message can sit in a log before we force a flush
#log.flush.interval.ms=1000

############################# Log Retention Policy #############################

# The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.

# The minimum age of a log file to be eligible for deletion due to age
log.retention.hours=168

# A size-based retention policy for logs. Segments are pruned from the log unless the remaining
# segments drop below log.retention.bytes. Functions independently of log.retention.hours.
#log.retention.bytes=1073741824

# The maximum size of a log segment file. When this size is reached a new log segment will be created.
log.segment.bytes=1073741824

# The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
log.retention.check.interval.ms=300000

############################# Zookeeper #############################

# Zookeeper connection string (see zookeeper docs for details).
# This is a comma separated host:port pairs, each corresponding to a zk
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
# 配置zookeeper集群访问地址
zookeeper.connect=127.0.0.1:2181,127.0.0.1:2182,127.0.0.1:2183

# Timeout in ms for connecting to zookeeper
zookeeper.connection.timeout.ms=6000


############################# Group Coordinator Settings #############################

# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance.
# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms.
# The default value for this is 3 seconds.
# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing.
# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup.
group.initial.rebalance.delay.ms=0

C:\kafka_2.12-2.1.1\kafka_2.12-2.1.1-9093\config\server.properties

# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# see kafka.server.KafkaConfig for additional details and defaults

############################# Server Basics #############################

# The id of the broker. This must be set to a unique integer for each broker.
# 修改集群节点编号, 同一集群中所有节点的值不能相同
broker.id=3

############################# Socket Server Settings #############################

# The address the socket server listens on. It will get the value returned from 
# java.net.InetAddress.getCanonicalHostName() if not configured.
#   FORMAT:
#     listeners = listener_name://host_name:port
#   EXAMPLE:
#     listeners = PLAINTEXT://your.host.name:9092
#listeners=PLAINTEXT://:9092
# 配置Socket服务器监听地址
listeners=PLAINTEXT://127.0.0.1:9093

# Hostname and port the broker will advertise to producers and consumers. If not set, 
# it uses the value for "listeners" if configured.  Otherwise, it will use the value
# returned from java.net.InetAddress.getCanonicalHostName().
#advertised.listeners=PLAINTEXT://your.host.name:9092
# 配置broker通知producer和consumer的服务地址, 如果没设置则用listeners的值
advertised.listeners=PLAINTEXT://127.0.0.1:9093

# Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details
#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL

# The number of threads that the server uses for receiving requests from the network and sending responses to the network
num.network.threads=3

# The number of threads that the server uses for processing requests, which may include disk I/O
num.io.threads=8

# The send buffer (SO_SNDBUF) used by the socket server
socket.send.buffer.bytes=102400

# The receive buffer (SO_RCVBUF) used by the socket server
socket.receive.buffer.bytes=102400

# The maximum size of a request that the socket server will accept (protection against OOM)
socket.request.max.bytes=104857600


############################# Log Basics #############################

# A comma separated list of directories under which to store log files
# 配置日志存储位置
log.dirs=C:/kafka_2.12-2.1.1/kafka_2.12-2.1.1-9093/logs

# The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
# topic默认分区个数
num.partitions=1

# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
num.recovery.threads.per.data.dir=1

############################# Internal Topic Settings  #############################
# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"
# For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3.
# 设置保存副本数为3, 这样宕机一台还能继续消费
offsets.topic.replication.factor=3
transaction.state.log.replication.factor=1
transaction.state.log.min.isr=1

############################# Log Flush Policy #############################

# Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# There are a few important trade-offs here:
#    1. Durability: Unflushed data may be lost if you are not using replication.
#    2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
#    3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to excessive seeks.
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.

# The number of messages to accept before forcing a flush of data to disk
#log.flush.interval.messages=10000

# The maximum amount of time a message can sit in a log before we force a flush
#log.flush.interval.ms=1000

############################# Log Retention Policy #############################

# The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.

# The minimum age of a log file to be eligible for deletion due to age
log.retention.hours=168

# A size-based retention policy for logs. Segments are pruned from the log unless the remaining
# segments drop below log.retention.bytes. Functions independently of log.retention.hours.
#log.retention.bytes=1073741824

# The maximum size of a log segment file. When this size is reached a new log segment will be created.
log.segment.bytes=1073741824

# The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
log.retention.check.interval.ms=300000

############################# Zookeeper #############################

# Zookeeper connection string (see zookeeper docs for details).
# This is a comma separated host:port pairs, each corresponding to a zk
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
# 配置zookeeper集群访问地址
zookeeper.connect=127.0.0.1:2181,127.0.0.1:2182,127.0.0.1:2183

# Timeout in ms for connecting to zookeeper
zookeeper.connection.timeout.ms=6000


############################# Group Coordinator Settings #############################

# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance.
# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms.
# The default value for this is 3 seconds.
# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing.
# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup.
group.initial.rebalance.delay.ms=0

四、创建日志文件夹

C:\kafka_2.12-2.1.1\kafka_2.12-2.1.1-9091\logs

C:\kafka_2.12-2.1.1\kafka_2.12-2.1.1-9092\logs

C:\kafka_2.12-2.1.1\kafka_2.12-2.1.1-9093\logs

五、kafka启动脚本

kafka1.bat

title kafka_2.12-2.1.1-9091
C:
cd C:\kafka_2.12-2.1.1\kafka_2.12-2.1.1-9091
.\bin\windows\kafka-server-start.bat .\config\server.properties

kafka2.bat

title kafka_2.12-2.1.1-9092
C:
cd C:\kafka_2.12-2.1.1\kafka_2.12-2.1.1-9092
.\bin\windows\kafka-server-start.bat .\config\server.properties

kafka3.bat

title kafka_2.12-2.1.1-9093
C:
cd C:\kafka_2.12-2.1.1\kafka_2.12-2.1.1-9093
.\bin\windows\kafka-server-start.bat .\config\server.properties

kafka-cluster.bat

@echo off
    color 0A

@echo on
    start kafka1.bat
    start kafka2.bat
    start kafka3.bat

@echo off
    echo.
    pause

@echo on

© 著作权归作者所有

聆风阁主
粉丝 0
博文 19
码字总数 16521
作品 0
福州
私信 提问
简单搭建 Apache Kafka 分布式消息系统

早先都是用的基于 JMS 规范的消息系统, 像 ActiveMQ, IBM MQSeries 等. 随着互联网的发展, 大约是要适应当今大数据, 高可用性, 高效的需求, 于是诞生了 Apache Kafka 这一新时代的分布式消息...

YanbinQ
2016/10/18
35
0
单台服务器部署 Zookeeper 伪集群服务及 kafka 消息中间件服务

在开发环境中,为减少服务器成本和提高开发效率,通常在一台测试服务器部署各种服务,使用不同的本地 IP 和不同端口号将涉及到集群的服务往往跑在一台机器上模拟集群,在这里我们称做伪集群。...

hww_面条酱
2018/01/10
0
0
Kafka 单机和分布式环境搭建与案例使用

Kafka 单机和分布式环境搭建与案例使用 目录(?)[+] 一、单机环境搭建 官方参考文章: http://kafka.apache.org/quickstart 1、下载和解压安装包 这里下载了zookeeper和kafaka两个安装包,下载...

yucaifu1989
2018/04/19
0
0
kafka学习(6)集群的搭建

回顾: KAFKA集群搭建: 参考百度文章,搭建KAFKA本地集群。 这里要注意一个坑: kafka的config/server.properties文件中的broker.id要和kafka-logs/meta.properties里面的broker.id一致,而k...

太猪-YJ
04/15
9
0
kafka学习(一) ---- 基本概念以及环境搭建

由于项目涉及到kafka,自己以前没有接触过这方面的,学习了下,将搭建kafka运行环境同大家分享(单机搭建的Windows下的运行环境,Linux下的由于懒得装虚拟机就没有搭建,以后有时间在分享一次...

火龙战士
2016/08/11
1K
2

没有更多内容

加载失败,请刷新页面

加载更多

64.监控平台介绍 安装zabbix 忘记admin密码

19.1 Linux监控平台介绍 19.2 zabbix监控介绍 19.3/19.4/19.6 安装zabbix 19.5 忘记Admin密码如何做 19.1 Linux监控平台介绍: 常见开源监控软件 ~1.cacti、nagios、zabbix、smokeping、ope...

oschina130111
今天
13
0
当餐饮遇上大数据,嗯真香!

之前去开了一场会,主题是「餐饮领袖新零售峰会」。认真听完了餐饮前辈和新秀们的分享,觉得获益匪浅,把脑子里的核心纪要整理了一下,今天和大家做一个简单的分享,欢迎感兴趣的小伙伴一起交...

数澜科技
今天
7
0
DNS-over-HTTPS 的下一代是 DNS ON BLOCKCHAIN

本文作者:PETER LAI ,是 Diode 的区块链工程师。在进入软件开发领域之前,他主要是在做工商管理相关工作。Peter Lai 也是一位活跃的开源贡献者。目前,他正在与 Diode 团队一起开发基于区块...

红薯
今天
10
0
CC攻击带来的危害我们该如何防御?

随着网络的发展带给我们很多的便利,但是同时也带给我们一些网站安全问题,网络攻击就是常见的网站安全问题。其中作为站长最常见的就是CC攻击,CC攻击是网络攻击方式的一种,是一种比较常见的...

云漫网络Ruan
今天
12
0
实验分析性专业硕士提纲撰写要点

为什么您需要研究论文的提纲? 首先当您进行研究时,您需要聚集许多信息和想法,研究论文提纲可以较好地组织你的想法, 了解您研究资料的流畅度和程度。确保你写作时不会错过任何重要资料以此...

论文辅导员
今天
8
0

没有更多内容

加载失败,请刷新页面

加载更多

返回顶部
顶部