OS X 10.11 EI Caption SIP小小探究

原创
2015/10/17 16:01
阅读数 725

OS X 10.11 EI Caption SIP

System Integrity Protection (SIP, sometimes referred to as rootless) is a security feature of OS X El Capitan, the operating system by Apple Inc. It protects certain system processesfiles and folders from being modified or tampered with by other processes even when executed by the root user or by a user with root privileges (sudo). Apple says that the root user can be a significant risk factor to the system's security, especially on systems with a single user account on which that user is also the administrator. System Integrity Protection is enabled by default, but can be disabled.

查阅了一下官方手册:

Configuring System Integrity Protection

https://developer.apple.com/library/mac/documentation/Security/Conceptual/System_Integrity_Protection_Guide/ConfiguringSystemIntegrityProtection/ConfiguringSystemIntegrityProtection.html#//apple_ref/doc/uid/TP40016462-CH5-SW1


csrutil status 查看SIP状态

重启Command+R 进入恢复模式,在 Utilities > Security Configuration 

关闭SIP

csrutil disable

开启SIP

csrutil enable

就可以了。

在 OS X 10.11 中引入的 Rootless 是如何实现的?有什么优势与缺陷?

http://www.zhihu.com/question/31116473

知乎上面SIP的解释。


以下是转帖的一篇博文:

Boot argument options in OS X

When you boot a Mac system you have the option to supply keyboard commands at startup to boot the system to alternate environments. For instance, a common option is to hold the Shift key to boot to Safe Mode, but you can also hold Command-V for verbose mode (a text output of items as they load), or Command-S for Single User mode, which drops you to the command line as the "root" user so you can perform troubleshooting tasks.

In addition to keyboard commands at startup, you can use the "nvram" terminal command to set a number of different boot options, which might be useful when troubleshooting your Mac. Apple's machines have a number of hidden boot options that you can use, though do keep in mind that most of these are for troubleshooting purposes and will only be useful to programmers.

sudo nvram boot-args="-v"


This command will set the system to always boot to Verbose mode, so you do not have to hold Command-V at startup.

sudo nvram boot-args="-x"


This command will have the system always boot into Safe Mode.

sudo nvram boot-args="-s"


This command will boot the system into Single User mode without needing to hold Command-S at startup.

These three options are the most common ones that people would use when troubleshooting their systems; however, there are a number of others you can use as well:

sudo nvram boot-args="iog=0x0"


This reverses the "Clamshell" mode for Apple's laptop systems, where when you close the display but connect the system to an external monitor and keyboard the system will stay awake. After running this command, when connecting an external monitor, the internal display will be disabled, which can be beneficial in some situations such as those where you are mirroring your desktop but wish to run the external display at a higher resolution than your laptop can run.

sudo nvram boot-args="debug=0x144"


This is a combination of kernel debugging features that will show you extra information about the kernel's processes, which can be exceptionally useful if a system is experiencing kernel panics. Another option is to use debug=0x14e, which will display even more logging options. The primary use for this is that it enables old-style kernel panics that show scrolled text on the screen about why the system panicked, instead of displaying the gray backdrop and the message to merely restart your system. Alternative debug options are the following, though these will likely only be useful to kernel programmers:

0x01 - Stop at boot time and wait for the debugger to attach

0x02 - Send kernel debugging output to the console

0x04 - Drop into debugger on a nonmaskable interrupt

0x08 - Send kernel debugging information to a serial port

0x10 - Make ddb the default debugger

0x20 - Output diagnostics information to the system log

0x40 - Allow the debugger to ARP and route

0x80 - Support old versions of gdb on newer systems

0x100 - Disable the graphical panic dialog screen

sudo nvram boot-args="arch=x86_64"


On Snow Leopard system, even though a 64-bit kernel is available, the system boots to the 32-bit one by default. This command will change this so the system always boots to the 64-bit kernel. To change systems to always boot to a 32-bit kernel, replace the "x86_64" section of the command with "i386." In some instances, third-party kernel extensions might be 32-bit or 64-bit only, which will require booting to the respective kernel type in order to load.

sudo nvram boot-args="maxmem=32"


Limits the addressable memory to the specified amount, which in this case is 32GB. This is another one of those that is likely only useful to programmers. Without it, the system sets the memory limit to either the maximum that the hardware can address, or to the amount that is installed.

sudo nvram boot-args="cpus=1"


Limits the number of active processors in the system to the set level. Apple's developer tools have an option to enable or disable some of the CPUs on the system, but you can do this manually by running this command and specifying the number of CPU cores to use. In some cases, such as with laptop systems, this might help preserve power, though is likely not useful for much else unless you are testing and programming.

With these options you can set them individually by running the above commands one at a time, or you can combine them if needed. For instance, to set the system to boot into Safe Mode and verbosely show items as they load during startup, you can either run both of the commands listed above to do this, or you can simply combine them into the following command:

sudo nvram boot-args="-x -v"

To disable these features and have the system boot normally without any extra options, you can erase them from the nvram by either resetting it or, more specifically, by running either of the following commands in the Terminal (these will reset the boot arguments instead of resetting all the nvram variables):

sudo nvram boot-args=""
sudo nvram -d boot-args


展开阅读全文
打赏
1
0 收藏
分享
加载中
更多评论
打赏
0 评论
0 收藏
1
分享
返回顶部
顶部