文档章节

阿里云的maven配置

韩毅Evan
 韩毅Evan
发布于 2017/07/01 14:49
字数 1380
阅读 7
收藏 0

国内连接maven官方的仓库更新依赖库,网速一般很慢,收集一些国内快速的maven仓库镜像以备用。 

 

放在maven的conf下就行,setting.xml

<?xml version="1.0" encoding="UTF-8"?>

<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements.  See the NOTICE file
distributed with this work for additional information
regarding copyright ownership.  The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License.  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied.  See the License for the
specific language governing permissions and limitations
under the License.
-->

<!--
 | This is the configuration file for Maven. It can be specified at two levels:
 |
 |  1. User Level. This settings.xml file provides configuration for a single user, 
 |                 and is normally provided in ${user.home}/.m2/settings.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -s /path/to/user/settings.xml
 |
 |  2. Global Level. This settings.xml file provides configuration for all Maven
 |                 users on a machine (assuming they're all using the same Maven
 |                 installation). It's normally provided in 
 |                 ${maven.home}/conf/settings.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -gs /path/to/global/settings.xml
 |
 | The sections in this sample file are intended to give you a running start at
 | getting the most out of your Maven installation. Where appropriate, the default
 | values (values used when the setting is not specified) are provided.
 |
 |-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0" 
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
          xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
  <!-- localRepository
   | The path to the local repository maven will use to store artifacts.
   |
   | Default: ${user.home}/.m2/repository
  <localRepository>/path/to/local/repo</localRepository>
  -->
  <localRepository>D:\Repositories\Maven</localRepository>

  <!-- interactiveMode
   | This will determine whether maven prompts you when it needs input. If set to false,
   | maven will use a sensible default value, perhaps based on some other setting, for
   | the parameter in question.
   |
   | Default: true
  <interactiveMode>true</interactiveMode>
  -->

  <!-- offline
   | Determines whether maven should attempt to connect to the network when executing a build.
   | This will have an effect on artifact downloads, artifact deployment, and others.
   |
   | Default: false
  <offline>false</offline>
  -->

  <!-- pluginGroups
   | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
   | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
   | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
   |-->
  <pluginGroups>
    <!-- pluginGroup
     | Specifies a further group identifier to use for plugin lookup.
    <pluginGroup>com.your.plugins</pluginGroup>
    -->
    <pluginGroup>org.mortbay.jetty</pluginGroup>
  </pluginGroups>

  <!-- proxies
   | This is a list of proxies which can be used on this machine to connect to the network.
   | Unless otherwise specified (by system property or command-line switch), the first proxy
   | specification in this list marked as active will be used.
   |-->
  <proxies>
    <!-- proxy
     | Specification for one proxy, to be used in connecting to the network.
     |
    <proxy>
      <id>optional</id>
      <active>true</active>
      <protocol>http</protocol>
      <username>proxyuser</username>
      <password>proxypass</password>
      <host>proxy.host.net</host>
      <port>80</port>
      <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
    </proxy>
    -->
  </proxies>

  <!-- servers
   | This is a list of authentication profiles, keyed by the server-id used within the system.
   | Authentication profiles can be used whenever maven must make a connection to a remote server.
   |-->
  <servers>
    <!-- server
     | Specifies the authentication information to use when connecting to a particular server, identified by
     | a unique name within the system (referred to by the 'id' attribute below).
     | 
     | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are 
     |       used together.
     |
    <server>
      <id>deploymentRepo</id>
      <username>repouser</username>
      <password>repopwd</password>
    </server>
    -->

    <!-- Another sample, using keys to authenticate.
    <server>
      <id>siteServer</id>
      <privateKey>/path/to/private/key</privateKey>
      <passphrase>optional; leave empty if not used.</passphrase>
    </server>
    -->
    <server>
        <id>releases</id>
        <username>ali</username>
        <password>ali</password>
      </server>
      <server>
        <id>Snapshots</id>
        <username>ali</username>
        <password>ali</password>
      </server>
  </servers>

  <!-- mirrors
   | This is a list of mirrors to be used in downloading artifacts from remote repositories.
   | 
   | It works like this: a POM may declare a repository to use in resolving certain artifacts.
   | However, this repository may have problems with heavy traffic at times, so people have mirrored
   | it to several places.
   |
   | That repository definition will have a unique id, so we can create a mirror reference for that
   | repository, to be used as an alternate download site. The mirror site will be the preferred 
   | server for that repository.
   |-->
  <mirrors>
    <!-- mirror
     | Specifies a repository mirror site to use instead of a given repository. The repository that
     | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
     | for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
     |
    <mirror>
      <id>mirrorId</id>
      <mirrorOf>repositoryId</mirrorOf>
      <name>Human Readable Name for this Mirror.</name>
      <url>http://my.repository.com/repo/path</url>
    </mirror>
     -->
    <mirror>
      <!--This sends everything else to /public -->
      <id>nexus</id>
      <mirrorOf>*</mirrorOf> 
      <url>http://maven.aliyun.com/nexus/content/groups/public/</url>
    </mirror>
    <mirror>
      <!--This is used to direct the public snapshots repo in the 
          profile below over to a different nexus group -->
      <id>nexus-public-snapshots</id>
      <mirrorOf>public-snapshots</mirrorOf> 
      <url>http://maven.aliyun.com/nexus/content/repositories/snapshots/</url>
    </mirror>
  </mirrors>

  <!-- profiles
   | This is a list of profiles which can be activated in a variety of ways, and which can modify
   | the build process. Profiles provided in the settings.xml are intended to provide local machine-
   | specific paths and repository locations which allow the build to work in the local environment.
   |
   | For example, if you have an integration testing plugin - like cactus - that needs to know where
   | your Tomcat instance is installed, you can provide a variable here such that the variable is 
   | dereferenced during the build process to configure the cactus plugin.
   |
   | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
   | section of this document (settings.xml) - will be discussed later. Another way essentially
   | relies on the detection of a system property, either matching a particular value for the property,
   | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a 
   | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
   | Finally, the list of active profiles can be specified directly from the command line.
   |
   | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
   |       repositories, plugin repositories, and free-form properties to be used as configuration
   |       variables for plugins in the POM.
   |
   |-->
  <profiles> 
    <profile>
      <id>development</id>
      <repositories>
        <repository>
          <id>central</id>
          <url>http://central</url>
          <releases><enabled>true</enabled><updatePolicy>always</updatePolicy></releases>
          <snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
        </repository>
      </repositories>
     <pluginRepositories>
        <pluginRepository>
          <id>central</id>
          <url>http://central</url>
          <releases><enabled>true</enabled><updatePolicy>always</updatePolicy></releases>
          <snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
        </pluginRepository>
      </pluginRepositories>
    </profile>
    <profile>
      <!--this profile will allow snapshots to be searched when activated-->
      <id>public-snapshots</id>
      <repositories>
        <repository>
          <id>public-snapshots</id>
          <url>http://public-snapshots</url>
          <releases><enabled>false</enabled></releases>
          <snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
        </repository>
      </repositories>
     <pluginRepositories>
        <pluginRepository>
          <id>public-snapshots</id>
          <url>http://public-snapshots</url>
          <releases><enabled>false</enabled></releases>
          <snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
        </pluginRepository>
      </pluginRepositories>
    </profile>
  </profiles>

   <activeProfiles>
    <activeProfile>development</activeProfile>
    <activeProfile>public-snapshots</activeProfile>
   </activeProfiles>
</settings>
#收集的比较快的maven仓库
http://maven.wso2.org/nexus/content/groups/public/
http://jcenter.bintray.com/
http://maven.antelink.com/content/repositories/central/
http://nexus.openkoala.org/nexus/content/groups/Koala-release/
http://maven.tmatesoft.com/content/groups/public/
http://mavensync.zkoss.org/maven2/
http://maven.springframework.org/release/
<mirror>
    <id>UK</id>
    <name>UK Central</name>
    <url>http://uk.maven.org/maven2</url>
    <mirrorOf>central</mirrorOf>
</mirror>

<mirror>
    <id>sonatype</id>
    <name>sonatype Central</name>
    <url>http://repository.sonatype.org/content/groups/public/</url>
    <mirrorOf>central</mirrorOf>
</mirror>

<mirror>
    <id>jboss-public-repository-group</id>
    <name>JBoss Public Repository Group</name>
    <url>http://repository.jboss.org/nexus/content/groups/public</url>
    <mirrorOf>central</mirrorOf>
</mirror>

 

© 著作权归作者所有

韩毅Evan
粉丝 2
博文 49
码字总数 67347
作品 0
南京
私信 提问
自动化部署之Maven的私有仓库Nexus

1、什么是Nexus? 在前面进行maven项目的构建中,可以看到在构建的过程中需要安装maven的依赖插件,如图: 而在maven的默认配置中是在官网的中央仓库和第三方的maven仓库进行下载,速度偏慢。...

IT_外卖小哥
2017/12/25
0
0
关于Maven插件com.spotify/docker-maven-plugin 一直无法访问阿里云的service

我使用maven插件com.spotify/docker-maven-plugin来向阿里云的register中push镜像,但始终不能连接到阿里云,插件访问的地址一直是 [ERROR] Failed to execute goal com.spotify:docker-mave...

zhang57022
2018/12/10
5K
3
【maven基础】配置远程仓库

如果不进行仓库配置,默认情况下,会到apache官方的仓库下载依赖包,由于Apache官方的仓库位于国外,下载速度较慢,会降低开发效率,笔者建议使用国内的Maven仓库或者搭建自己的私服,国内基...

卯金刀GG
2018/04/04
25
0
Maven国内可用下载速度快的仓库镜像

码笔记分享国内可用的Maven仓库,来自阿里云的Maven中央仓库,国内可用下载速度超快的仓库镜像: 阿里云Maven国内可用仓库 Maven是很流行的项目管理工具,但是由于国外的仓库经常连接不上,即...

云服务器吧
05/25
0
0
idea配置maven并添加镜像配置

版权声明:本文为博主原创文章,未经博主允许不得转载。 https://blog.csdn.net/a1b2c3d4123456/article/details/53915056 前提是安装好maven。 1、打开maven存放文件夹找到 conf ->setting...

大号小白兔
2016/12/28
0
0

没有更多内容

加载失败,请刷新页面

加载更多

3_数组

3_数组

行者终成事
今天
7
0
经典系统设计面试题解析:如何设计TinyURL(二)

原文链接:https://www.educative.io/courses/grokking-the-system-design-interview/m2ygV4E81AR 编者注:本文以一道经典的系统设计面试题:《如何设计TinyURL》的参考答案和解析为例,帮助...

APEMESH
今天
7
0
使用logstash同步MySQL数据到ES

概述   在生成业务常有将MySQL数据同步到ES的需求,如果需要很高的定制化,往往需要开发同步程序用于处理数据。但没有特殊业务需求,官方提供的logstash就很有优势了。   在使用logstas...

zxiaofan666
今天
10
0
X-MSG-IM-分布式信令跟踪能力

经过一周多的鏖战, X-MSG-IM的分布式信令跟踪能力已基本具备, 特点是: 实时. 只有要RX/TX就会实时产生信令跟踪事件, 先入kafka, 再入influxdb待查. 同时提供实时sub/pub接口. 完备. 可以完整...

dev5
今天
7
0
OpenJDK之CyclicBarrier

OpenJDK8,本人看的是openJDK。以前就看过,只是经常忘记,所以记录下 图1 CyclicBarrier是Doug Lea在JDK1.5中引入的,作用就不详细描述了,主要有如下俩个方法使用: await()方法,如果当前线...

克虏伯
今天
8
0

没有更多内容

加载失败,请刷新页面

加载更多

返回顶部
顶部