文档章节

MySQL数据库传输BLOB类型数据丢失 解决办法

球形闪电z
 球形闪电z
发布于 2016/11/25 09:00
字数 1379
阅读 3
收藏 0
点赞 0
评论 0

修改MySQL安装目录下my.ini文件配置:

添加 max_allowed_packet = 16M

# MySQL Server Instance Configuration File
# ----------------------------------------------------------------------
# Generated by the MySQL Server Instance Configuration Wizard
#
#
# Installation Instructions
# ----------------------------------------------------------------------
#
# On Linux you can copy this file to /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options
# (@localstatedir@ for this installation) or to
# ~/.my.cnf to set user-specific options.
#
# On Windows you should keep this file in the installation directory 
# of your server (e.g. C:\Program Files\MySQL\MySQL Server X.Y). To
# make sure the server reads the config file use the startup option 
# "--defaults-file". 
#
# To run run the server from the command line, execute this in a 
# command line shell, e.g.
# mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
#
# To install the server as a Windows service manually, execute this in a 
# command line shell, e.g.
# mysqld --install MySQLXY --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
#
# And then execute this in a command line shell to start the server, e.g.
# net start MySQLXY
#
#
# Guildlines for editing this file
# ----------------------------------------------------------------------
#
# In this file, you can use all long options that the program supports.
# If you want to know the options a program supports, start the program
# with the "--help" option.
#
# More detailed information about the individual options can also be
# found in the manual.
#
#
# CLIENT SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by MySQL client applications.
# Note that only client applications shipped by MySQL are guaranteed
# to read this section. If you want your own MySQL client program to
# honor these values, you need to specify it as an option during the
# MySQL client library initialization.
#
[client]

port=3306

[mysql]

default-character-set=utf8
max_allowed_packet = 16M

# SERVER SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by the MySQL Server. Make sure that
# you have installed the server correctly (see above) so it reads this 
# file.
#
[mysqld]

# The TCP/IP Port the MySQL Server will listen on
port=3306


#Path to installation directory. All paths are usually resolved relative to this.
basedir="C:/Program Files/MySQL/MySQL Server 5.5/"

#Path to the database root
datadir="C:/ProgramData/MySQL/MySQL Server 5.5/Data/"

# The default character set that will be used when a new schema or table is
# created and no character set is defined
character-set-server=utf8

# The default storage engine that will be used when create new tables when
default-storage-engine=INNODB

# Set the SQL mode to strict
sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"

# The maximum amount of concurrent sessions the MySQL server will
# allow. One of these connections will be reserved for a user with
# SUPER privileges to allow the administrator to login even if the
# connection limit has been reached.
max_connections=100

# Query cache is used to cache SELECT results and later return them
# without actual executing the same query once again. Having the query
# cache enabled may result in significant speed improvements, if your
# have a lot of identical queries and rarely changing tables. See the
# "Qcache_lowmem_prunes" status variable to check if the current value
# is high enough for your load.
# Note: In case your tables change very often or if your queries are
# textually different every time, the query cache may result in a
# slowdown instead of a performance improvement.
query_cache_size=0

# The number of open tables for all threads. Increasing this value
# increases the number of file descriptors that mysqld requires.
# Therefore you have to make sure to set the amount of open files
# allowed to at least 4096 in the variable "open-files-limit" in
# section [mysqld_safe]
table_cache=256

# Maximum size for internal (in-memory) temporary tables. If a table
# grows larger than this value, it is automatically converted to disk
# based table This limitation is for a single table. There can be many
# of them.
tmp_table_size=35M
max_allowed_packet = 16M


# How many threads we should keep in a cache for reuse. When a client
# disconnects, the client's threads are put in the cache if there aren't
# more than thread_cache_size threads from before.  This greatly reduces
# the amount of thread creations needed if you have a lot of new
# connections. (Normally this doesn't give a notable performance
# improvement if you have a good thread implementation.)
thread_cache_size=8

#*** MyISAM Specific options

# The maximum size of the temporary file MySQL is allowed to use while
# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
# If the file-size would be bigger than this, the index will be created
# through the key cache (which is slower).
myisam_max_sort_file_size=100G

# If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method.  This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_sort_buffer_size=69M

# Size of the Key Buffer, used to cache index blocks for MyISAM tables.
# Do not set it larger than 30% of your available memory, as some memory
# is also required by the OS to cache rows. Even if you're not using
# MyISAM tables, you should still set it to 8-64M as it will also be
# used for internal temporary disk tables.
max_allowed_packet=60M
key_buffer_size=55M

# Size of the buffer used for doing full table scans of MyISAM tables.
# Allocated per thread, if a full scan is needed.
read_buffer_size=64K
read_rnd_buffer_size=256K

# This buffer is allocated when MySQL needs to rebuild the index in
# REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE
# into an empty table. It is allocated per thread so be careful with
# large settings.
sort_buffer_size=256K


#*** INNODB Specific options ***


# Use this option if you have a MySQL server with InnoDB support enabled
# but you do not plan to use it. This will save memory and disk space
# and speed up some things.
#skip-innodb

# Additional memory pool that is used by InnoDB to store metadata
# information.  If InnoDB requires more memory for this purpose it will
# start to allocate it from the OS.  As this is fast enough on most
# recent operating systems, you normally do not need to change this
# value. SHOW INNODB STATUS will display the current amount used.
innodb_additional_mem_pool_size=3M

# If set to 1, InnoDB will flush (fsync) the transaction logs to the
# disk at each commit, which offers full ACID behavior. If you are
# willing to compromise this safety, and you are running small
# transactions, you may set this to 0 or 2 to reduce disk I/O to the
# logs. Value 0 means that the log is only written to the log file and
# the log file flushed to disk approximately once per second. Value 2
# means the log is written to the log file at each commit, but the log
# file is only flushed to disk approximately once per second.
innodb_flush_log_at_trx_commit=1

# The size of the buffer InnoDB uses for buffering log data. As soon as
# it is full, InnoDB will have to flush it to disk. As it is flushed
# once per second anyway, it does not make sense to have it very large
# (even with long transactions).
innodb_log_buffer_size=2M

# InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and
# row data. The bigger you set this the less disk I/O is needed to
# access data in tables. On a dedicated database server you may set this
# parameter up to 80% of the machine physical memory size. Do not set it
# too large, though, because competition of the physical memory may
# cause paging in the operating system.  Note that on 32bit systems you
# might be limited to 2-3.5G of user level memory per process, so do not
# set it too high.
innodb_buffer_pool_size=107M

# Size of each log file in a log group. You should set the combined size
# of log files to about 25%-100% of your buffer pool size to avoid
# unneeded buffer pool flush activity on log file overwrite. However,
# note that a larger logfile size will increase the time needed for the
# recovery process.
innodb_log_file_size=54M

# Number of threads allowed inside the InnoDB kernel. The optimal value
# depends highly on the application, hardware as well as the OS
# scheduler properties. A too high value may lead to thread thrashing.
innodb_thread_concurrency=10

 

本文转载自:http://www.cnblogs.com/zhaoYuQing-java2015/p/5388186.html

共有 人打赏支持
球形闪电z

球形闪电z

粉丝 1
博文 4
码字总数 0
作品 0
大兴
程序员
Mysql 中的blob相关问题

一、MySQL BLOB 类型介绍 MySQL中,BLOB是一个二进制大型对象,是一个可以存储大量数据的容器,它能容纳不同大小的数据。BLOB类型实际是个类型系列(TinyBlob、Blob、MediumBlob、LongBlob)...

文文1
2015/09/08
17
0
跟王老师学MySQL:MySQL数据类型常见问题及解答

跟王老师学MySQL:MySQL数据类型常见问题及解答 主讲教师:王少华 QQ群号:483773664 学习内容 整数类型和浮点类型的异同 浮点数类型和定点数类型的异同 char和varchar类型的异同 时间和日期...

imentors
2016/07/04
0
0
Blob,Text 大文件存入数据库

将图片存储到数据库中(Blob) public void BlogIn(){Connection con=getConnection();System.out.println(con);//插入数据库的语句String sql="insert into user(name,message) values(?,?......

进击的_渣渣
2014/07/13
0
0
MySQL优化-2-数据库对象

优化表的数据类型 - PROCEDURE ANALYSE() 表需要使用何种数据类型,是需要根据应用来判断的。虽然应用设计的时候需要考虑字段的长度留有一定的冗余,但是不推荐让很多字段都留有大量的冗余,...

jiyayun
2012/12/19
0
0
JDBC Item3: LOB(Large objects)

mysql存储大文本采用的是Text,Text和blob分别又分为: TINYTEXT、TEXT、MEDIUMTEXT和LONGTEXT TINYBLOB、BLOB、MEDIUMBLOB和LONGBLOB 一、使用JDBC处理MySQL的大文本 对于MySQL中的Text类型...

_Roger_
2016/01/27
17
0
Navicat Premium 数据传输如何设置

对于Navicat Premium大家都知道其支持不同服务器类型的数据传输,比如:从 MySQL 到 Oracle。但是有些用户朋友对于这方面不是很了解,本教程就来给大家介绍介绍Navicat Premium 数据传输如何...

Navicat数据库管理工具
2016/06/06
93
0
关于图片或者文件在数据库的存储方式归纳

商品图片,用户上传的头像,其他方面的图片。目前业界存储图片有两种做法: 1、 把图片直接以二进制形式存储在数据库中 一般数据库提供一个二进制字段来存储二进制数据。比如mysql中有个blo...

蜗牛奔跑
2016/03/09
105
0
修改mysql的字段类型

1.授权mysql在远程机器上以登录 GRANT ALL PRIVILEGES ON . TO 'root'@'host' IDENTIFIED BY 'pwd' WITH GRANT OPTION 2.修改字段名称和类型 --alter table upload change column alter tab......

晨曦之光
2012/04/10
484
0
mysql物理设计

定义数据库,及表的命名规范: 1,数据库,表及字段的命名要遵循可读性原则, 表意性原则, 长名原则(不尽量或者不使用缩写,使用长一些的命名,这样以后会看起来更明白,但是也不太非常的长...

之渊
2016/11/03
14
0
Sqoop:容错

权声明:本文为博主原创文章,未经博主允许不得转载。 Sqoop本身的容错依赖于Hadoop,这里我们focus在Sqoop传输任务失败的处理,确切的说,focus在Sqoop如何解决传输任务失败引发的数据一致性...

Zero零_度
2016/09/22
1
0

没有更多内容

加载失败,请刷新页面

加载更多

下一页

istio源码分析之pilot-discovery模块分析

本文分析的istio代码版本为0.8.0,commit为0cd8d67,commit时间为2018年6月18日。 本文为Service Mesh深度学习系列之一: Service Mesh深度学习系列part1—istio源码分析之pilot-agent模块分...

xiaomin0322
11分钟前
0
0
数据库基本操作:增删改查及联表操作

所用软件:SQL Server Management Studio 首先第一步,建立一个表。在这里命名为T1。并在里面填入几条数据。如图: T1 一.查询 查询所有:select * from T1; 按条件查询:select * from T1 ...

小_橙_子
15分钟前
0
0
Crontab作业时间设置

今天,遇到这么一个题目,周一到周五的9:00-16:59之间,每隔两分钟将某个命令运行一次。给的答案是: */2 9-16 * * 1-5 /usr/sbin/somecommand dosomething 乍一看,这个答案不对,应...

大别阿郎
20分钟前
0
0
ES17-JAVA API文档管理

1.保存文档 可以通过json工具把java对象转换成json字符串进行保存,也可以通过内置的帮助类直接构建json格式 /** * 获取客户端 * * @return */public static TransportClie...

贾峰uk
20分钟前
0
0
Python代码规范和命名规范

前言 Python 学习之旅,先来看看 Python 的代码规范,让自己先有个意识,而且在往后的学习中慢慢养成习惯 一、简明概述 1、编码 如无特殊情况, 文件一律使用 UTF-8 编码 如无特殊情况, 文件头...

blackfoxya
23分钟前
0
0
联动滑动之一:NestScrollChild和NestedScrollingParent

NestScrollChild和NestedScrollingParent 吐槽一下开源中国竟然标题字数有限制 由于项目中使用了CoordinateLayout来解决联动以及实现炫酷的UI效果,那么必须就要研究一波源码了,毕竟知其然知...

JerryLin123
40分钟前
1
0
cloudera spark2.2 读写hbase

cloudera spark2.2 读写hbase 例子 host = 'bigdata-03,bigdata-05,bigdata-04'conf = { "hbase.zookeeper.quorum": host, "hbase.mapreduce.inputtable": "student1"}k......

osenlin
45分钟前
0
0
数据库规范化

转载自 一个小时学会MySQL数据库 地址:http://www.cnblogs.com/best/p/6517755.html 截取其中 1.4 部分 用于自己学习使用 感谢作者:张果 1.4、数据库规范化 经过一系列的步骤,我们现在终于...

十万猛虎下画山
46分钟前
0
0
ios逆向之工具篇

Reveal:查看任意app的UI结构 注:1.不越狱的手机,可以用Reveal来查看自己app的UI结构,不能查看其它app的结构。 2.越狱手机上可以查看任意app的UI结构。 IDA:反编译工具 从App Store下载的...

HeroHY
46分钟前
0
0
EOS区块链平台智能合约示例HelloWorld

我们将介绍一个使用EOS智能合约构建hello World的例子。 一般环境设置通过上一篇文章已经说明,这方面的问题大家可以看本博客上一篇文章,本文引用了官方EOS在Git上的示例。 运行nodeos 要通...

笔阁
48分钟前
1
0

没有更多内容

加载失败,请刷新页面

加载更多

下一页

返回顶部
顶部