文档章节

Cubieboard1智能云计划开启!

cubieboard
 cubieboard
发布于 2014/09/02 18:05
字数 1419
阅读 69
收藏 0

因为前面我跟大家说过,Cb1我不打算继续支持它的CbOS了,所以我决定,拿他当Cloud Server
以前智能家居的帖子我也发了,后面因为手机升级了iOS7,siriproxy不能用了,所以暂停了。
我现在给cb弄了个盒子,准备安装smb,开始计划咯~
这是盒子,本来里面装姜母鸭的:
DSC00696.JPG 
亮亮的,看到了吗
DSC00697.JPG 
里面其实有个灯
DSC00699.JPG 
上面写的是Cubie,用电烙铁切的,万能烙铁,被我拿去焊锡,切亚克力,切塑料,熔松香粘
DSC00698.JPG 
然后ssh登录,我这是有给cb固定ip的,105
因为以前不玩文件共享,所以这是第一次安装samba:

  1. apt-get install samba -y



顺便说下,我用mac系统,没法使用这个协议,因此安装另一个软件——vsftpd

  1. apt-get install vsftpd -y



我的配置:

  1. # Example config file /etc/vsftpd.conf

  2. #

  3. # The default compiled in settings are fairly paranoid. This sample file

  4. # loosens things up a bit, to make the ftp daemon more usable.

  5. # Please see vsftpd.conf.5 for all compiled in defaults.

  6. #

  7. # READ THIS: This example file is NOT an exhaustive list of vsftpd options.

  8. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's

  9. # capabilities.

  10. #

  11. #

  12. # Run standalone?  vsftpd can run either from an inetd or as a standalone

  13. # daemon started from an initscript.

  14. listen=YES

  15. #

  16. # Run standalone with IPv6?

  17. # Like the listen parameter, except vsftpd will listen on an IPv6 socket

  18. # instead of an IPv4 one. This parameter and the listen parameter are mutually

  19. # exclusive.

  20. #listen_ipv6=YES

  21. #

  22. # Allow anonymous FTP? (Beware - allowed by default if you comment this out).

  23. anonymous_enable=YES

  24. #

  25. # Uncomment this to allow local users to log in.

  26. local_enable=YES

  27. #

  28. # Uncomment this to enable any form of FTP write command.

  29. write_enable=YES

  30. #

  31. # Default umask for local users is 077. You may wish to change this to 022,

  32. # if your users expect that (022 is used by most other ftpd's)

  33. local_umask=077

  34. #

  35. # Uncomment this to allow the anonymous FTP user to upload files. This only

  36. # has an effect if the above global write enable is activated. Also, you will

  37. # obviously need to create a directory writable by the FTP user.

  38. #anon_upload_enable=YES

  39. #

  40. # Uncomment this if you want the anonymous FTP user to be able to create

  41. # new directories.

  42. #anon_mkdir_write_enable=YES

  43. #

  44. # Activate directory messages - messages given to remote users when they

  45. # go into a certain directory.

  46. dirmessage_enable=YES

  47. #

  48. # If enabled, vsftpd will display directory listings with the time

  49. # in  your  local  time  zone.  The default is to display GMT. The

  50. # times returned by the MDTM FTP command are also affected by this

  51. # option.

  52. use_localtime=YES

  53. #

  54. # Activate logging of uploads/downloads.

  55. xferlog_enable=YES

  56. #

  57. # Make sure PORT transfer connections originate from port 20 (ftp-data).

  58. connect_from_port_20=YES

  59. #

  60. # If you want, you can arrange for uploaded anonymous files to be owned by

  61. # a different user. Note! Using "root" for uploaded files is not

  62. # recommended!

  63. #chown_uploads=YES

  64. #chown_username=whoever

  65. #

  66. # You may override where the log file goes if you like. The default is shown

  67. # below.

  68. #xferlog_file=/var/log/vsftpd.log

  69. #

  70. # If you want, you can have your log file in standard ftpd xferlog format.

  71. # Note that the default log file location is /var/log/xferlog in this case.

  72. #xferlog_std_format=YES

  73. #

  74. # You may change the default value for timing out an idle session.

  75. #idle_session_timeout=600

  76. #

  77. # You may change the default value for timing out a data connection.

  78. #data_connection_timeout=120

  79. #

  80. # It is recommended that you define on your system a unique user which the

  81. # ftp server can use as a totally isolated and unprivileged user.

  82. #nopriv_user=ftpsecure

  83. #

  84. # Enable this and the server will recognise asynchronous ABOR requests. Not

  85. # recommended for security (the code is non-trivial). Not enabling it,

  86. # however, may confuse older FTP clients.

  87. #async_abor_enable=YES

  88. #

  89. # By default the server will pretend to allow ASCII mode but in fact ignore

  90. # the request. Turn on the below options to have the server actually do ASCII

  91. # mangling on files when in ASCII mode.

  92. # Beware that on some FTP servers, ASCII support allows a denial of service

  93. # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd

  94. # predicted this attack and has always been safe, reporting the size of the

  95. # raw file.

  96. # ASCII mangling is a horrible feature of the protocol.

  97. #ascii_upload_enable=YES

  98. #ascii_download_enable=YES

  99. #

  100. # You may fully customise the login banner string:

  101. #ftpd_banner=Welcome to blah FTP service.

  102. #

  103. # You may specify a file of disallowed anonymous e-mail addresses. Apparently

  104. # useful for combatting certain DoS attacks.

  105. #deny_email_enable=YES

  106. # (default follows)

  107. #banned_email_file=/etc/vsftpd.banned_emails

  108. #

  109. # You may restrict local users to their home directories.  See the FAQ for

  110. # the possible risks in this before using chroot_local_user or

  111. # chroot_list_enable below.

  112. chroot_local_user=YES

  113. #

  114. # You may specify an explicit list of local users to chroot() to their home

  115. # directory. If chroot_local_user is YES, then this list becomes a list of

  116. # users to NOT chroot().

  117. # (Warning! chroot'ing can be very dangerous. If using chroot, make sure that

  118. # the user does not have write access to the top level directory within the

  119. # chroot)

  120. #chroot_local_user=YES

  121. chroot_list_enable=YES

  122. # (default follows)

  123. chroot_list_file=/etc/vsftpd.chroot_list

  124. #

  125. # You may activate the "-R" option to the builtin ls. This is disabled by

  126. # default to avoid remote users being able to cause excessive I/O on large

  127. # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume

  128. # the presence of the "-R" option, so there is a strong case for enabling it.

  129. #ls_recurse_enable=YES

  130. #

  131. # Customization

  132. #

  133. # Some of vsftpd's settings don't fit the filesystem layout by

  134. # default.

  135. #

  136. # This option should be the name of a directory which is empty.  Also, the

  137. # directory should not be writable by the ftp user. This directory is used

  138. # as a secure chroot() jail at times vsftpd does not require filesystem

  139. # access.

  140. secure_chroot_dir=/var/run/vsftpd/empty

  141. #

  142. # This string is the name of the PAM service vsftpd will use.

  143. pam_service_name=vsftpd

  144. #

  145. # This option specifies the location of the RSA certificate to use for SSL

  146. # encrypted connections.

  147. rsa_cert_file=/etc/ssl/private/vsftpd.pem


之后可以用user用户登录,账户允许chroot文件:

  1. root@cubieboard :~/source_code/cloudserver# cat /etc/vsftpd.chroot_list 

  2. user

  3. root@cubieboard :~/source_code/cloudserver#


试了下phpmailer,没成功,就是一直卡着,不知道为啥
然后我自己写的ledc程序,用cron启动,每5分钟ping一次谷歌,当然我觉得ping百度更好,因为谷歌有时候不通,通就亮灯,不通灭灯,通过GPIO控制,引入的文件就是gpio的控制文件

  1. #include <stdlib.h>

  2. #include <stdio.h>

  3. #include "gpio_lib.c"

  4. #include <string.h>


  5. int dy(int port)

  6. {

  7.     //printf("SUNXI GPIO tool\n");

  8.     if(SETUP_OK!=sunxi_gpio_init()){

  9.         printf("Failed to initialize GPIO\n");

  10.         return 1;

  11.     }

  12.     

  13.     if(SETUP_OK!=sunxi_gpio_set_cfgpin(SUNXI_GPD(port),OUTPUT)){

  14.         printf("Failed to config GPIO pin\n");

  15.         return 1;

  16.     }

  17.     

  18.     if(system("ping google.com -c 1") != 0){

  19.         //Is network OK?

  20.     printf("No network!\n");

  21.     if(sunxi_gpio_output(SUNXI_GPD(port),LOW)){

  22.         printf("Failed to set GPIO pin value\n");

  23.         return 1;

  24.     }

  25.     }else{

  26.         printf("Fine!\n");

  27.         if(sunxi_gpio_output(SUNXI_GPD(port),HIGH)){

  28.             printf("Failed to set GPIO pin value\n");

  29.             return 1;

  30.         }

  31.     }

  32.     sunxi_gpio_cleanup();

  33.     return 0;

  34. }


  35. int main(int argc,char* argv[]){

  36.     dy(0);

  37. }



用crontab -e编辑文件,增加:

  1.   */5 *   *   *   *    /root/source_code/cloudserver/ledc > /tmp/netlog



好了,大家慢慢玩~


原文作者:tll

原文链接:http://forum.cubietech.com/forum.php?mod=viewthread&tid=1223&extra=page%3D2

本文转载自:http://forum.cubietech.com/forum.php?mod=viewthread&tid=1223&extra=page%3D2http://forum.cubietech...

cubieboard
粉丝 11
博文 64
码字总数 2651
作品 1
珠海
私信 提问
手把手教你阿里云钉钉智能前台如何实现0元购

2017年5月开始阿里巴巴旗下阿里云公司推出唯一 一款针对用户的幸运券,这款幸运券就是大家俗称的优惠券了。目前钉钉智能前台m1已经上升为钉钉智能前台m2了,它们属于钉钉考勤机系列。 这款优...

不想当码农的程序员
2018/01/09
0
0
前台AI免费送咯!钉钉智能前台开启0元购计划!

HR小伙伴们,大家好,不知道你有没有受到每月那几天的困扰?噢!我说的是每月公司员工考勤的统计:员工打不了卡、请假、出差、迟到、补休,为了让大家能准时发放工资,身为HR的你,只有加班加...

小宙
2018/01/10
0
0
助力小米AI战略 小米IoT宣布开发者计划将全面开放

11月28日,2017MIDC首届小米IoT开发者大会在京召开,小米公司创始人、董事长兼CEO雷军透露称,小米IoT平台联网设备超过8500万台,日活设备超过1000万台,合作伙伴超400家,已经稳居全球最大的...

智科技
2017/11/28
0
0
数据智能创建能源领域“智能助手”

2018云栖大会深圳峰会电力与新能源专场上,阿里云大数据资深专家古世相分享了阿里云利用数据动能和人工智能,为能源企业构造数据应用闭环,实现数据智能化又添新篇章。 数十款阿里云产品限时...

1993wang
2018/05/07
0
0
十年再出发:阿里云智能战略加速的“四级火箭”

3月21日,在2019阿里云峰会·北京站上,阿里云智能总裁张建锋首次对外阐述了阿里云战略加速的“四级火箭”:达摩院加持的云、数据智能的云、最佳实践的云和被集成的云,从技术、产品、商业和...

阿里云云栖社区
03/21
21
0

没有更多内容

加载失败,请刷新页面

加载更多

Java 文件类操作API与IO编程基础知识

阅读目录: https://www.w3cschool.cn/java/java-io-file.html Java 文件 Java 文件 Java 文件操作 Java 输入流 Java 输入流 Java 文件输入流 Java 缓冲输入流 Java 推回输入流 Java 数据输入...

boonya
34分钟前
3
0
SDKMAN推荐一个好

是在大多数基于Unix的系统上管理多个软件开发工具包的并行版本的工具。它提供了一个方便的命令行界面(CLI)和API来安装,切换,删除和列出sdk相关信息。以下是一些特性: By Developers, fo...

hotsmile
59分钟前
9
0
什么是 HDFS

是什么? HDFS 是基于 Java 的分布式文件系统,允许您在 Hadoop 集群中的多个节点上存储大量数据。 起源: 单机容量往往无法存储大量数据,需要跨机器存储。统一管理分布在集群上的文件系统称...

Garphy
今天
5
0
一起来学Java8(四)——复合Lambda

在一起来学Java8(二)——Lambda表达式中我们学习了Lambda表达式的基本用法,现在来了解下复合Lambda。 Lambda表达式的的书写离不开函数式接口,复合Lambda的意思是在使用Lambda表达式实现函...

猿敲月下码
今天
11
0
debian10使用putty配置交换机console口

前言:Linux的推广普及,需要配合解决实际应用方能有成效! 最近强迫自己用linux进行实际工作,过程很痛苦,还好通过网络一一解决,感谢各位无私网友博客的帮助! 系统:debian10 桌面:xfc...

W_Lu
今天
12
0

没有更多内容

加载失败,请刷新页面

加载更多

返回顶部
顶部