文档章节

阿里maven仓库设置,不设置mirror防止覆盖项目pom指定repo

code_pool
 code_pool
发布于 07/23 22:47
字数 1591
阅读 23
收藏 0

拷贝以下内容至maven的settings.xml全替换即可。

<?xml version="1.0" encoding="UTF-8"?>

<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements.  See the NOTICE file
distributed with this work for additional information
regarding copyright ownership.  The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License.  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied.  See the License for the
specific language governing permissions and limitations
under the License.
-->

<!--
 | This is the configuration file for Maven. It can be specified at two levels:
 |
 |  1. User Level. This settings.xml file provides configuration for a single user,
 |                 and is normally provided in ${user.home}/.m2/settings.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -s /path/to/user/settings.xml
 |
 |  2. Global Level. This settings.xml file provides configuration for all Maven
 |                 users on a machine (assuming they're all using the same Maven
 |                 installation). It's normally provided in
 |                 ${maven.conf}/settings.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -gs /path/to/global/settings.xml
 |
 | The sections in this sample file are intended to give you a running start at
 | getting the most out of your Maven installation. Where appropriate, the default
 | values (values used when the setting is not specified) are provided.
 |
 |-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
          xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
  <!-- localRepository
   | The path to the local repository maven will use to store artifacts.
   |
   | Default: ${user.home}/.m2/repository
  <localRepository>/path/to/local/repo</localRepository>
  -->
<localRepository>D:/local_repo</localRepository>
  <!-- interactiveMode
   | This will determine whether maven prompts you when it needs input. If set to false,
   | maven will use a sensible default value, perhaps based on some other setting, for
   | the parameter in question.
   |
   | Default: true
  <interactiveMode>true</interactiveMode>
  -->

  <!-- offline
   | Determines whether maven should attempt to connect to the network when executing a build.
   | This will have an effect on artifact downloads, artifact deployment, and others.
   |
   | Default: false
  <offline>false</offline>
  -->

  <!-- pluginGroups
   | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
   | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
   | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
   |-->
  <pluginGroups>
    <!-- pluginGroup
     | Specifies a further group identifier to use for plugin lookup.
    <pluginGroup>com.your.plugins</pluginGroup>
    -->
  </pluginGroups>

  <!-- proxies
   | This is a list of proxies which can be used on this machine to connect to the network.
   | Unless otherwise specified (by system property or command-line switch), the first proxy
   | specification in this list marked as active will be used.
   |-->
  <proxies>
    <!-- proxy
     | Specification for one proxy, to be used in connecting to the network.
     |
    <proxy>
      <id>optional</id>
      <active>true</active>
      <protocol>http</protocol>
      <username>proxyuser</username>
      <password>proxypass</password>
      <host>proxy.host.net</host>
      <port>80</port>
      <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
    </proxy>
    -->
  </proxies>

  <!-- servers
   | This is a list of authentication profiles, keyed by the server-id used within the system.
   | Authentication profiles can be used whenever maven must make a connection to a remote server.
   |-->
  <servers>
    <!-- server
     | Specifies the authentication information to use when connecting to a particular server, identified by
     | a unique name within the system (referred to by the 'id' attribute below).
     |
     | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
     |       used together.
     |
    <server>
      <id>deploymentRepo</id>
      <username>repouser</username>
      <password>repopwd</password>
    </server>
    -->

    <!-- Another sample, using keys to authenticate.
    <server>
      <id>siteServer</id>
      <privateKey>/path/to/private/key</privateKey>
      <passphrase>optional; leave empty if not used.</passphrase>
    </server>
    -->
  </servers>

  <!-- mirrors
   | This is a list of mirrors to be used in downloading artifacts from remote repositories.
   |
   | It works like this: a POM may declare a repository to use in resolving certain artifacts.
   | However, this repository may have problems with heavy traffic at times, so people have mirrored
   | it to several places.
   |
   | That repository definition will have a unique id, so we can create a mirror reference for that
   | repository, to be used as an alternate download site. The mirror site will be the preferred
   | server for that repository.
   |-->
  <mirrors>
    <!-- mirror
     | Specifies a repository mirror site to use instead of a given repository. The repository that
     | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
     | for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
     |
    <mirror>
      <id>mirrorId</id>
      <mirrorOf>repositoryId</mirrorOf>
      <name>Human Readable Name for this Mirror.</name>
      <url>http://my.repository.com/repo/path</url>
    </mirror>
     -->
     <!-- <mirror> -->
        <!-- <id>nexus-aliyun</id> -->
        <!-- <mirrorOf>*</mirrorOf> -->
        <!-- <name>Nexus aliyun</name> -->
        <!-- <url>http://maven.aliyun.com/nexus/content/groups/public</url> -->
    <!-- </mirror>  -->
    <!-- <mirror> -->
       <!-- <id>osgeo</id> -->
            <!-- <name>Geotools repository</name> -->
            <!-- <url>http://download.osgeo.org/webdav/geotools</url> -->
    <!-- </mirror>  -->
    <!-- <mirror> -->
        <!-- <id>matsim</id> -->
            <!-- <url>http://dl.bintray.com/matsim/matsim</url> -->
    <!-- </mirror>  -->
    <!-- <mirror> -->
         <!-- <id>ojo-snapshots</id> -->
      <!-- <url>http://oss.jfrog.org/libs-snapshot</url> -->
    <!-- </mirror>  -->
  </mirrors>

  <!-- profiles
   | This is a list of profiles which can be activated in a variety of ways, and which can modify
   | the build process. Profiles provided in the settings.xml are intended to provide local machine-
   | specific paths and repository locations which allow the build to work in the local environment.
   |
   | For example, if you have an integration testing plugin - like cactus - that needs to know where
   | your Tomcat instance is installed, you can provide a variable here such that the variable is
   | dereferenced during the build process to configure the cactus plugin.
   |
   | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
   | section of this document (settings.xml) - will be discussed later. Another way essentially
   | relies on the detection of a system property, either matching a particular value for the property,
   | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
   | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
   | Finally, the list of active profiles can be specified directly from the command line.
   |
   | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
   |       repositories, plugin repositories, and free-form properties to be used as configuration
   |       variables for plugins in the POM.
   |
   |-->
  <profiles>
    <profile>
        <!-- id必须唯一 -->
        <id>myRepository1</id>
        <repositories>
            <repository>
                <!-- id必须唯一 -->
                <id>myRepository1_1</id>
                <!-- 仓库的url地址 -->
                <url>http://maven.aliyun.com/nexus/content/groups/public/</url>
                <releases>
                    <enabled>true</enabled>
                </releases>
                <snapshots>
                    <enabled>true</enabled>
                    <updatePolicy>always</updatePolicy>
                </snapshots>
            </repository>
        </repositories>
    </profile>
    <profile>
        <!-- id必须唯一 -->
        <id>myRepository_osgeo</id>
        <repositories>
            <repository>
                <!-- id必须唯一 -->
 
                <id>osgeo</id>
            <url>http://download.osgeo.org/webdav/geotools</url>
                <releases>
                    <enabled>true</enabled>
                </releases>
                <snapshots>
                    <enabled>true</enabled>
                    <updatePolicy>always</updatePolicy>
                </snapshots>
            </repository>
        </repositories>
    </profile>
    <profile>
        <!-- id必须唯一 -->
        <id>myRepository_matsim</id>
        <repositories>
            <repository>
                <!-- id必须唯一 -->
                <id>matsim</id>
                <!-- 仓库的url地址 -->
                 <url>http://dl.bintray.com/matsim/matsim</url>
                <releases>
                    <enabled>true</enabled>
                </releases>
                <snapshots>
                    <enabled>true</enabled>
                    <updatePolicy>always</updatePolicy>
                </snapshots>
            </repository>
        </repositories>
    </profile>
    <profile>
        <!-- id必须唯一 -->
        <id>myRepository_ojo</id>
        <repositories>
            <repository>
                <!-- id必须唯一 -->
                <id>ojo</id>
                <!-- 仓库的url地址 -->
                <url>http://oss.jfrog.org/libs-snapshot</url>
                <releases>
                    <enabled>true</enabled>
                </releases>
                <snapshots>
                    <enabled>true</enabled>
                    <updatePolicy>always</updatePolicy>
                </snapshots>
            </repository>
        </repositories>
    </profile>
    <!-- profile
     | Specifies a set of introductions to the build process, to be activated using one or more of the
     | mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
     | or the command line, profiles have to have an ID that is unique.
     |
     | An encouraged best practice for profile identification is to use a consistent naming convention
     | for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
     | This will make it more intuitive to understand what the set of introduced profiles is attempting
     | to accomplish, particularly when you only have a list of profile id's for debug.
     |
     | This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
    <profile>
      <id>jdk-1.4</id>

      <activation>
        <jdk>1.4</jdk>
      </activation>

      <repositories>
        <repository>
          <id>jdk14</id>
          <name>Repository for JDK 1.4 builds</name>
          <url>http://www.myhost.com/maven/jdk14</url>
          <layout>default</layout>
          <snapshotPolicy>always</snapshotPolicy>
        </repository>
      </repositories>
    </profile>
    -->

    <!--
     | Here is another profile, activated by the system property 'target-env' with a value of 'dev',
     | which provides a specific path to the Tomcat instance. To use this, your plugin configuration
     | might hypothetically look like:
     |
     | ...
     | <plugin>
     |   <groupId>org.myco.myplugins</groupId>
     |   <artifactId>myplugin</artifactId>
     |
     |   <configuration>
     |     <tomcatLocation>${tomcatPath}</tomcatLocation>
     |   </configuration>
     | </plugin>
     | ...
     |
     | NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
     |       anything, you could just leave off the <value/> inside the activation-property.
     |
    <profile>
      <id>env-dev</id>

      <activation>
        <property>
          <name>target-env</name>
          <value>dev</value>
        </property>
      </activation>

      <properties>
        <tomcatPath>/path/to/tomcat/instance</tomcatPath>
      </properties>
    </profile>
    -->
  </profiles>
<!-- 激活myRepository1 -->
    

  <activeProfiles>
    <activeProfile>myRepository1</activeProfile>
    <!-- 激活myRepository2 -->
    <activeProfile>myRepository_osgeo</activeProfile>
    <activeProfile>myRepository_matsim</activeProfile>
    <activeProfile>myRepository_ojo</activeProfile>
  </activeProfiles>
 
</settings>
 

© 著作权归作者所有

code_pool
粉丝 2
博文 57
码字总数 41152
作品 0
乌鲁木齐
高级程序员
私信 提问
maven repository

maven repository 什么是Maven仓库 在不用Maven的时候,比如说以前我们用Ant构建项目,在项目目录下,往往会看到一个名为/lib的子目录,那里存放着各类第三方依赖 jar文件,如log4j.jar,jun...

squanchao
2016/08/15
52
0
Maven最佳实践:Maven仓库

什么是Maven仓库 在不用Maven的时候,比如说以前我们用Ant构建项目,在项目目录下,往往会看到一个名为/lib的子目录,那里存放着各类第三方依赖jar文件,如log4j.jar,junit.jar等等。每建立...

开源中国首席撸码官
2015/09/30
251
0
Maven之阿里云镜像仓库配置

方式一:全局配置 可以添加阿里云的镜像到maven的setting.xml配置中,这样就不需要每次在pom中,添加镜像仓库的配置,在mirrors节点下面添加子节点: 注:< mirrorOf>可以设置为哪个中央仓库...

看987432.cn
03/26
0
0
Maven读书系列:Maven仓库

什么是Maven仓库 在不用Maven的时候,比如说以前我们用Ant构建项目,在项目目录下,往往会看到一个名为/lib的子目录,那里存放着各类第三方依赖jar文件,如log4j.jar,junit.jar等等。每建立...

-鹏
2015/09/16
41
0
pom中的repository节点配置没有起作用

pom中的repository节点配置没有起作用 今天maven构建是碰到一个问题,pom.xml配置了repository,结果运行过程中需要的jar包没有去这里下载,明明添加了,直接点开也能找到。找了原因原来是m...

liyuchang
2018/04/19
228
0

没有更多内容

加载失败,请刷新页面

加载更多

计算机实现原理专题--二进制减法器(二)

在计算机实现原理专题--二进制减法器(一)中说明了基本原理,现准备说明如何来实现。 首先第一步255-b运算相当于对b进行按位取反,因此可将8个非门组成如下图的形式: 由于每次做减法时,我...

FAT_mt
昨天
6
0
好程序员大数据学习路线分享函数+map映射+元祖

好程序员大数据学习路线分享函数+map映射+元祖,大数据各个平台上的语言实现 hadoop 由java实现,2003年至今,三大块:数据处理,数据存储,数据计算 存储: hbase --> 数据成表 处理: hive --> 数...

好程序员官方
昨天
7
0
tabel 中含有复选框的列 数据理解

1、el-ui中实现某一列为复选框 实现多选非常简单: 手动添加一个el-table-column,设type属性为selction即可; 2、@selection-change事件:选项发生勾选状态变化时触发该事件 <el-table @sel...

everthing
昨天
6
0
【技术分享】TestFlight测试的流程文档

上架基本需求资料 1、苹果开发者账号(如还没账号先申请-苹果开发者账号申请教程) 2、开发好的APP 通过本篇教程,可以学习到ios证书申请和打包ipa上传到appstoreconnect.apple.com进行TestF...

qtb999
昨天
10
0
再见 Spring Boot 1.X,Spring Boot 2.X 走向舞台中心

2019年8月6日,Spring 官方在其博客宣布,Spring Boot 1.x 停止维护,Spring Boot 1.x 生命周期正式结束。 其实早在2018年7月30号,Spring 官方就已经在博客进行过预告,Spring Boot 1.X 将维...

Java技术剑
昨天
18
0

没有更多内容

加载失败,请刷新页面

加载更多

返回顶部
顶部