文档章节

C#打印机操作类

深圳大道
 深圳大道
发布于 2016/12/29 15:39
字数 4547
阅读 21
收藏 0
using System;
using System.Collections.Generic;
using System.Text;

namespace MacPrinter
{
    public class ZPL_Command
    {

        /// (^EF)<summary>
        /// 清除设定 (已包含起始结束命令)
        /// </summary>
        /// <returns></returns>
        public string _CmdEraseSetup()
        {
            string st = "^XA^EF^FS^XZ";
            return st.ToUpper();
        }

        /// <summary>
        ///(^XA) ZPL命令开始
        /// </summary>
        /// <returns></returns>
        public string _CmdStart()
        {
            return "^XA".ToUpper();
        }

        /// <summary>
        ///(^XZ)  ZPL命令结尾
        /// </summary>
        /// <returns></returns>
        public string _CmdEnd()
        {
            return "^XZ".ToUpper();
        }

        /// <summary>
        /// (^FS)一个字段的结束(结束一行命令)
        /// </summary>
        /// <returns></returns>
        public string _CmdLineEnd()
        {
            return "^FS".ToUpper();
        }

        /// <summary>
        ///(^A)字体设定{^Af,o,h,w}
        /// </summary>
        /// <param name="DesiredFont">(f)需要选择的字体默认为O(A-Z,1-9)</param>
        /// <param name="FontOrientation">(o)字体是否旋转默认N(R旋转90°,I旋转180°,B旋转270°,)</param>
        /// <param name="FontHeight">(h)设定字体高度以点计算默认为15(10-1500)</param>
        /// <param name="FontWidth">(w)设定字体宽度以点计算默认为12(10-1500)</param>
        /// <returns></returns>
        public string _SetFont(string DesiredFont, string FontOrientation, int FontHeight, int FontWidth)
        {
            string _a = string.Format("^A{0}{1},{2},{3}", DesiredFont, FontOrientation, FontHeight, FontWidth);
            return _a.ToUpper();
        }

        /// <summary>
        /// (^A)字体设定{^Af,o,h,w}
        /// </summary>
        /// <param name="DesiredFont">(f)需要选择的字体默认为O(A-Z,1-9)</param>
        /// <param name="FontHeight">(h)设定字体高度以点计算默认为15(10-1500)</param>
        /// <param name="FontWidth">(w)设定字体宽度以点计算默认为12(10-1500)</param>
        /// <returns></returns>
        public string _SetFont(string DesiredFont, int FontHeight, int FontWidth)
        {
            return this._SetFont(DesiredFont, "N", FontHeight, FontWidth);
        }

        /// <summary>
        /// (^A@)调用字体名字设定字体{^A@o,h,w,n}
        /// </summary>
        /// <param name="FontOrientation">字体是否旋转默认N(R旋转90°,I旋转180°,B旋转270°,)</param>
        /// <param name="FontHeight">设定字体高度以点计算默认为15(10-1500)</param>
        /// <param name="FontWidth">设定字体宽度以点计算默认为12(10-1500)</param>
        /// <param name="FontName">Font Name(Cyrillic.FNT)</param>
        /// <returns></returns>
        public string _SetFont(string FontOrientation, int FontHeight, int FontWidth, string FontName)
        {
            return string.Format("^A@{0},{1},{2},{3}", FontOrientation, FontHeight, FontWidth, FontName);
        }

        /// <summary>
        /// (^B1o,e,h,f,g)
        /// </summary>
        /// <returns></returns>
        public string _SetCode11()
        {
            return "";
        }

        /// <summary>
        /// (^B3)Code39码(^B3o,e,h,f,g)
        /// </summary>
        /// <param name="Orientation">Orientation:
        ///Default value: Current ^FW setting
        ///Other values:
        ///N = Normal;
        ///R = Rotated, 90 degrees clockwise;
        ///I = Inverted, 180 degrees;
        ///B = Read from Bottom Up, 270 degrees;</param>
        /// <param name="e">Mod-43 Check Digit:
        ///Default value: N = No;
        ///Other value: Y = Yes</param>
        /// <param name="Height">Bar Code Height:
        /// Default value: Value set by ^BY ;
        ///Other values: 1 dot to 9999 dots
        /// </param>
        /// <param name="f">Print Interpretation Line
        ///Default value: Y = Yes;
        ///Other value: N = No</param>
        /// <param name="g">Print Interpretation Line Above Code
        ///Default value: N = No ;
        ///Other value: Y = Yes</param>
        /// <returns></returns>
        public string _SetCode39(string Orientation, string e, int Height, string f, string g)
        {
            return string.Format("^B3{0},{1},{2},{3},{4}", Orientation, e, Height, f, g).ToUpper();
        }

        /// <summary>
        /// (^B4)Code49码(^B4o,h,f,m)
        /// </summary>
        /// <param name="Orientation">
        /// Orientation
        ///Default value: Current ^FW value
        ///(^FW defaults to N = Normal at power-up);
        ///Other values:
        ///N = Normal;
        ///R = Rotated, 90 degrees clockwise;
        ///I = Inverted, 180 degrees;
        ///B = Read from Bottom Up, 270 degrees;</param>
        /// <param name="Height">Height Multiplier of Individual Rows
        ///Defined: This number, multiplied by the module,;
        ///equals the height of the individual rows in dots.;
        ///Default value: Value set by ^BY;
        ///Other values: 1 to height of label.;
        ///NOTE: 1 is not a recommended value.</param>
        /// <param name="f">Print Interpretation Line
        ///Default value: N = No line printed.
        ///Other values:
        ///A = Print interpretation line above code.;
        ///B = Print interpretation line below code.</param>
        /// <param name="m">Starting Mode
        ///Default value: A = Automatic Mode. Printer determines
        ///starting mode by analyzing field data.;
        ///Other values:
        ///0 = Regular Alphanumeric Mode;
        ///1 = Multiple Read Alphanumeric;
        ///2 = Regular Numeric Mode;
        ///3 = Group Alphanumeric Mode;
        ///4 = Regular Alphanumeric Shift 1;
        ///5 = Regular Alphanumeric Shift 2;</param>
        /// <returns></returns>
        public string _SetCode49(string Orientation, int Height, string f, string m)
        {
            return string.Format("^B4{0},{1},{2},{3}", Orientation, Height, f, m).ToUpper();

        }

        /// <summary>
        /// (^B7)PDF417 Bar Code(^B7o,h,s,c,r,t)
        /// </summary>
        /// <param name="o">Orientation Default value: Current ^FW value
        ///
        ///(^FW defaults to N = Normal at power-up);
        ///Other values:
        ///N = Normal;
        ///R = Rotated, 90 degrees clockwise;
        ///I = Inverted, 180 degrees;
        ///B = Read from Bottom Up, 270 degrees;</param>
        /// <param name="h">Bar Code Height for Individual Rows
        ///(This number, multiplied by the module, equals the
        ///height of the individual rows in dots.)
        ///Default value: Value set by ^BY;
        ///Other values: 1 dot to height of label.;
        ///NOTE: 1 is not a recommended value.</param>
        /// <param name="s">Security Level
        ///Determines the number of error detection and correction
        ///code words to be generated for the symbol.
        ///Default level provides only error detection (no correction).
        ///Increasing the security level adds increasing
        ///levels of error correction. (Increases symbol size.)
        ///Default value: 0 = Error detection only;
        ///Other values: 1 to 8.;
        ///Error detection plus correction.</param>
        /// <param name="c" >Number of Data Columns to Encode
        ///User can specify number of codeword columns giving
        ///control over the width of the symbol.;
        ///Default value: 1:2 row/column aspect ratio.;
        ///Other values: 1 to 30;</param>
        /// <param name="r">Number of Rows to Encode
        ///User can specify number of symbol rows giving control
        ///over the height of the symbol.;
        ///Default value: 1:2 row/column aspect ratio.;
        ///Other values: 3 to 90;;
        ///Example: With no row or column values entered, 72
        ///codewords would be encoded into a symbol of 6 columns
        ///and 12 rows. (Depending on codewords, aspect ratio
        ///will not always be exact.)</param>
        /// <param name="t">Truncate Right Row Indicators and Stop Pattern
        ///Default value: N = No truncation
        ///Print right row indicators and stop pattern.
        ///Other value: Y = Yes perform truncation.</param>
        /// <returns></returns>
        public string _SetCodeBDF417(string o, int h, int s, int c, int r, string t)
        {
            return string.Format("^B7{0},{1},{2},{3},{4},{5}", o, h, s, c, r, t).ToUpper();
        }

        //
        //
        /// <summary>
        /// (^B8)EAN-8 Bar Code(^B8o,h,f,g)
        /// </summary>
        /// <param name="o">Orientation
        ///Default value: Current ^FW value
        ///(^FW defaults to N = Normal at power-up);
        ///Other values:
        ///N = Normal;
        ///R = Rotated, 90 degrees clockwise;
        ///I = Inverted, 180 degrees;
        ///B = Read from Bottom Up, 270 degrees;</param>
        /// <param name="h">Bar Code Height
        ///Default value: Value set by ^BY;
        ///Other values: 1 dot to 9999 dots</param>
        /// <param name="f">Print Interpretation Line
        ///Default value: Y = Yes;
        ///Other value: N = No</param>
        /// <param name="g">Print Interpretation Line Above Code
        ///Default value: N = No;
        ///Other value: Y = Yes</param>
        /// <returns></returns>
        public string _SetCodeEAN8(string o, int h, string f, string g)
        {
            return string.Format("^B8{0},{1},{2},{3}", o, h, f, g).ToUpper();
        }

        /// <summary>
        /// (^B9)UPC-E Bar Code(^B9o,h,f,g,e)
        /// </summary>
        /// <param name="o">Orientation
        ///Default value: Current ^FW setting;
        ///Other values:
        ///N = Normal;
        ///R = Rotated, 90 degrees clockwise;
        ///I = Inverted, 180 degrees;
        ///B = Read from Bottom Up, 270 degrees</param>
        /// <param name="h">Bar Code Height
        ///Default value: Value set by ^BY;
        ///Other values: 1 dot to 9999 dots</param>
        /// <param name="f">Print Interpretation Line
        ///Default value: Y = Yes;
        ///Other value: N = No</param>
        /// <param name="g">Print Interpretation Line Above Code
        ///Default value: N = No;
        ///Other value: Y = Yes</param>
        /// <param name="e">Print Check Digit
        ///Default value: Y = Yes,;
        ///Other value: N = No</param>
        /// <returns></returns>
        public string _SetCodeUPC_E(string o, int h, string f, string g, string e)
        {
            return string.Format("^B9{0},{1},{2},{3},{4}", o, h, f, g, e).ToUpper();
        }

        /// <summary>
        /// (^BA)Code 93 Bar Code(^BAo,h,f,g,e)
        /// </summary>
        /// <param name="o">Orientation
        ///Default value: Current ^FW setting;
        ///Other values:
        ///N = Normal;
        ///R = Rotated, 90 degrees clockwise;
        ///I = Inverted, 180 degrees;
        ///B = Read from Bottom Up, 270 degrees</param>
        /// <param name="h">Bar Code Height
        ///Default value: Value set by ^BY;
        ///Other values: 1 dot to 9999 dots</param>
        /// <param name="f">Print Interpretation Line
        ///Default value: Y = Yes;
        ///Other value: N = No</param>
        /// <param name="g">Print Interpretation Line Above Code
        ///Default value: N = No;
        ///Other value: Y = Yes</param>
        /// <param name="e">Print Check Digit
        ///Default value: Y = Yes,;
        ///Other value: N = No</param>
        /// <returns></returns>
        public string _SetCode93(string o, int h, string f, string g, string e)
        {
            return string.Format("^BA{0},{1},{2},{3},{4}", o, h, f, g, e).ToUpper();
        }

        /// <summary>
        /// (^BC)Code 128 Bar Code(Subsets A, B, and C)(^BCo,h,f,g,e,m)
        /// </summary>
        /// <param name="o">Orientation
        ///Default value: Current ^FW setting;
        ///Other values:
        ///N = Normal;
        ///R = Rotated, 90 degrees clockwise;
        ///I = Inverted, 180 degrees;
        ///B = Read from Bottom Up, 270 degrees</param>
        /// <param name="h">Bar Code Height
        ///Default value: Value set by ^BY;
        ///Other values: 1 dot to 9999 dots</param>
        /// <param name="f">Print Interpretation Line
        ///Default value: Y = Yes
        ///Other value: N = No</param>
        /// <param name="g">Print Interpretation Line Above Code
        ///Default value: N = No;
        ///Other value: Y = Yes</param>
        /// <param name="e">UCC Check Digit
        ///Default value: N = No;;
        ///Other value: Y = Yes</param>
        /// <param name="m">Mode
        ///Default value: N = No mode selected;;
        ///Other value: U = UCC Case Mode;;
        ///(^FD or ^SN statement must contain 19
        ///numeric digits (it can also contain valid alpha
        ///characters). Subset C using FNC1 values is
        ///automatically selected.</param>
        /// <returns></returns>
        public string _SetCode128(string o, int h, string f, string g, string e, string m)
        {
            return string.Format("^BC{0},{1},{2},{3},{4},{5}", o, h, f, g, e, m);
        }

        /// <summary>
        /// (^BC)Code 128 Bar Code(Subsets A, B, and C)(^BCo,h,f,g,e,m)
        /// </summary>
        /// <param name="o">Orientation
        ///Default value: Current ^FW setting;
        ///Other values:
        ///N = Normal;
        ///R = Rotated, 90 degrees clockwise;
        ///I = Inverted, 180 degrees;
        ///B = Read from Bottom Up, 270 degrees</param>
        /// <param name="h">Bar Code Height
        ///Default value: Value set by ^BY;
        ///Other values: 1 dot to 9999 dots</param>
        /// <param name="f">Print Interpretation Line
        ///Default value: Y = Yes
        ///Other value: N = No</param>
        /// <param name="g">Print Interpretation Line Above Code
        ///Default value: N = No;
        ///Other value: Y = Yes</param>
        /// <param name="e">UCC Check Digit
        ///Default value: N = No;;
        ///Other value: Y = Yes</param>
        /// <returns></returns>
        public string _SetCode128(string o, int h, string f, string g, string e)
        {
            return string.Format("^BC{0},{1},{2},{3},{4}", o, h, f, g, e);

        }

        /// <summary>
        /// (^BY)  Change Bar Code Default Parameters(条码字段默认参数设置,用来改变窄元素(窄条或窄空)的宽度模块)
        /// </summary>
        /// <param name="w">模块(窄条)宽 (开机初始化值:2点 可接受的数值:1-10点) Module (Narrow Bar) Width (Initial power -up value: 2 dots ,Acceptable values: 1-10 dots)</param>
        /// <param name="r">宽条与窄条的比例 (开机初始化值:3.0 可接受的数值:2.0到3.0,0.1的增量(对固定比例的条码无效))Wide Bar to Narrow Bar Width Ratio(Initial power-up ratio: 3.0 ,Acceptable ratios: From 2.0 to 3.0 in .1 increments.)</param>
        /// <param name="h">条码高度 开机初始化值:10点可接受的数值:1点到标签高度(Height of Bars(Initial Power-up value: 10 dots, Acceptable values: 1 dot to height of label)</param>
        /// <returns></returns>
        public string _changeBarCodeDefault(int w, int r, int h)
        {
            string _by = string.Format("^BY{0},{1},{2}", w, r, h);
            return _by.ToUpper();
        }

        /// <summary>
        /// (^BY)  Change Bar Code Default Parameters(条码字段默认参数设置,用来改变窄元素(窄条或窄空)的宽度模块)
        /// </summary>
        /// <param name="w">模块(窄条)宽 (开机初始化值:2点 可接受的数值:1-10点) Module (Narrow Bar) Width (Initial power -up value: 2 dots ,Acceptable values: 1-10 dots)</param>
        /// <param name="r">宽条与窄条的比例 (开机初始化值:3.0 可接受的数值:2.0到3.0,0.1的增量(对固定比例的条码无效))Wide Bar to Narrow Bar Width Ratio(Initial power-up ratio: 3.0 ,Acceptable ratios: From 2.0 to 3.0 in .1 increments.)</param>
        /// <returns></returns>
        public string _changeBarCodeDefault(int w, string r)
        {
            string _by = string.Format("^BY{0},{1}", w, r);
            return _by.ToUpper();
        }

        /// <summary>
        /// (^LR) Reverse Print All Fields
        /// </summary>
        /// <param name="reverse">(y)是否以黑底白字打印{Y or N}</param>
        /// <returns></returns>
        public string _SetLableReverse(string reverse)
        {
            return string.Format("^LR{0}", reverse);
        }

        /// <summary>
        /// (^LL)设定Lable长度
        /// </summary>
        /// <param name="iLength">Number of Dots Along Y-Axis{Default value:1225 for Stripe ; 1244 for Xi printers}</param>
        /// <returns></returns>
        public string _SetLableLength(int iLength)
        {
            return string.Format("^LL{0}", iLength);
        }

        /// <summary>
        /// (^LS)移动Lable
        /// </summary>
        /// <param name="shiftValue">Shift Left Value of dots(Acceptable values: 0 to 9999 dots)</param>
        /// <returns></returns>
        public string _SetLableShift(int shiftValue)
        {
            return string.Format("^LS{0}", shiftValue);
        }

        /// <summary>
        /// (^LH) 设置Lable起点以及顶端距离(以点计算),如超出范围将抛出错误
        /// </summary>
        /// <param name="x">起点的X位置</param>
        /// <param name="y">起点的Y位置</param>
        /// <param name="width">实际Lable纸张的宽度(以点计算)</param>
        /// <param name="height">实际Lable纸张的宽度(以点计算)</param>
        /// <returns></returns>
        public string _SetLableHomeAndTop(int x, int y, int width, int height)
        {
            if (y < width && x < height)
            {
                string _lh_lt = string.Format("^LH{0},{1}^LT{1}", x, y);

                return _lh_lt.ToUpper();
            }
            else
            {
                throw new Exception("超出范围");
            }

        }

        /// <summary>
        /// (^LH)设定Lable的起点
        /// </summary>
        /// <param name="x">起点的X位置</param>
        /// <param name="y">起点的Y位置</param>
        /// <param name="width">实际Lable纸张的宽度(以点计算)</param>
        /// <param name="height">实际Lable纸张的宽度(以点计算)</param>
        /// <returns></returns>
        public string _SetLableHome(int x, int y)
        {
            return string.Format("^LH{0},{1}", x, y);
        }

        /// <summary>
        ///(^LT) Lable距离顶端边的距离(以点计算)
        /// </summary>
        /// <param name="iTop"></param>
        /// <returns></returns>
        public string _SetLableTop(int iTop)
        {
            return string.Format("^LT{0}", iTop);
        }

        /// <summary>
        /// (^DF)下载字体
        /// </summary>
        /// <param name="FileName">字体文件名称包含扩展名(STOREFMT.ZPL)</param>
        /// <returns></returns>
        public string _SetDownLoadFont(string FileName)
        {
            string _df = string.Format("^DF{0}", FileName);
            return _df.ToUpper();
        }

        /// <summary>
        ///(^MD) 设定打印字体容度
        /// </summary>
        /// <param name="darknessVale">容度值默认15(-30至+30)</param>
        /// <returns></returns>
        public string _SetMediaDarkness(int darknessVale)
        {
            string _md = string.Format("^MD{0}", darknessVale);
            return _md.ToUpper();
        }

        /// <summary>
        /// (^ML) Maximum Label Length
        /// </summary>
        /// <param name="iLength">Maximum Label Length in Dot Rows(Default value:Last permanently saved value)</param>
        /// <returns></returns>
        public string _SetMaxLableLength(int iLength)
        {
            return string.Format("^ML{0}", iLength);
        }

        /// <summary>
        /// (^MM)Print Mode
        /// </summary>
        /// <param name="strDesiredMode">
        /// Desired Mode
        /// Default value:
        ///T = Tear Off ; 
        ///Other Values:
        ///P = Peel Off (not available on S-300 printers)
        ///R = Rewind (Instruction ignored if parameter
        ///missing or incorrect.)
        ///A = Applicator
        /// </param>
        /// <param name="strPrePeelSelect">Pre-Peel Select(Y or N)</param>
        /// <returns></returns>
        public string _SetPrintMode(string strDesiredMode, string strPrePeelSelect)
        {
            return string.Format("^MM{0},{1}", strDesiredMode, strPrePeelSelect);
        }

        /// <summary>
        /// (^MN) Set Media Tracking
        /// </summary>
        /// <param name="strTrack">Media Being Used
        ///N = Continuous Media ;
        ///Y = Non-Continuous Media Web Sensing</param>
        /// <returns></returns>
        public string _SetMedieTracking(string strTrack)
        {
            return string.Format("^MN{0}", strTrack);
        }

        /// <summary>
        /// (^MU)Set Mode Units
        /// </summary>
        /// <param name="unitsType">units type
        /// Default: D = Dots
        ///I = Inches
        ///M = Millimeters</param>
        /// <returns></returns>
        public string _SetModeUnits(string unitsType)
        {
            return string.Format("^MU{0}", unitsType);
        }


        /// <summary>
        ///(^PR _^PW) 设定打印速度以及打印的宽度
        /// </summary>
        /// <param name="PrintSpeed">打印速度值默认3(A or 2 50.8 mm/sec,B or 3 76.2 mm/sec,C or 4 101.6 mm/sec,5 127 mm/sec,D or 6 152.4 mm/sec,E or 8 203.2 mm/sec.)</param>
        /// <param name="SlewSpeed">Default value: Speed D(A or 2 50.8 mm/sec,B or 3 76.2 mm/sec,C or 4 101.6 mm/sec,5 127 mm/sec,D or 6 152.4 mm/sec,E or 8 203.2 mm/sec)</param>
        /// <param name="BackfeedSpeed">Default value: Speed D(A or 2 50.8 mm/sec,B or 3 76.2 mm/sec,C or 4 101.6 mm/sec,5 127 mm/sec,D or 6 152.4 mm/sec,E or 8 203.2 mm/sec)</param>
        /// <param name="PrintWidth">打印宽度(根据Lable纸而定)</param>
        /// <returns></returns>
        public string _SetPrintRateAndWidth(int PrintSpeed, int SlewSpeed, int BackfeedSpeed, int PrintWidth)
        {
            string _pr_pw = string.Format("^PR{0},{1},{2}^PW{3}", PrintSpeed, SlewSpeed, BackfeedSpeed, PrintWidth);
            return _pr_pw.ToUpper();
        }

        /// <summary>
        ///(^PR) 设定打印速度以及打印的宽度
        /// </summary>
        /// <param name="PrintSpeed">打印速度值默认3(A or 2 50.8 mm/sec,B or 3 76.2 mm/sec,C or 4 101.6 mm/sec,5 127 mm/sec,D or 6 152.4 mm/sec,E or 8 203.2 mm/sec.)</param>
        /// <param name="SlewSpeed">Default value: Speed D(A or 2 50.8 mm/sec,B or 3 76.2 mm/sec,C or 4 101.6 mm/sec,5 127 mm/sec,D or 6 152.4 mm/sec,E or 8 203.2 mm/sec)</param>
        /// <param name="BackfeedSpeed">Default value: Speed D(A or 2 50.8 mm/sec,B or 3 76.2 mm/sec,C or 4 101.6 mm/sec,5 127 mm/sec,D or 6 152.4 mm/sec,E or 8 203.2 mm/sec)</param>
        /// <returns></returns>
        public string _SetPrintRate(int PrintSpeed, int SlewSpeed, int BackfeedSpeed)
        {
            return string.Format("^PR{0},{1},{2}", PrintSpeed, SlewSpeed, BackfeedSpeed);
        }


        /// <summary>
        /// (^PR)设置打印速度
        /// </summary>
        /// <param name="PrintSpeed">打印速度:
        /// Print Speed
        ///Default value: Speed A
        ///Acceptable values :
        ///A or 2 50.8 mm/sec. (2 inches/sec.)
        ///B or 3 76.2 mm/sec. (3 inches/sec.)
        ///C or 4 101.6 mm/sec. (4 inches/sec.)
        ///5 127 mm/sec. (5 inches/sec.)
        ///D or 6 152.4 mm/sec. (6 inches/sec.)
        ///E or 8 203.2 mm/sec. (8 inches/sec.)
        /// </param>
        /// <returns></returns>
        public string _SetPrintRate(int PrintSpeed)
        {
            return string.Format("^PR{0}", PrintSpeed);
        }

        /// <summary>
        /// (^PW)设置打印范围(宽度)
        /// </summary>
        /// <param name="printWidth">打印宽度</param>
        /// <returns></returns>
        public string _SetPrintWidth(int printWidth)
        {
            return string.Format("^PW{0}", printWidth);
        }

        /// <summary>
        ///  (^PR_^PW) 设定打印速度以及打印的宽度
        /// </summary>
        /// <param name="PrintSpeed">打印速度值默认3(A or 2 50.8 mm/sec,B or 3 76.2 mm/sec,C or 4 101.6 mm/sec,5 127 mm/sec,D or 6 152.4 mm/sec,E or 8 203.2 mm/sec.)</param>
        /// <param name="PrintWidth">打印宽度(根据Lable纸而定)</param>
        /// <returns></returns>
        public string _SetPrintRateAndWidth(int PrintSpeed, int PrintWidth)
        {
            return this._SetPrintRateAndWidth(PrintSpeed, 6, 6, PrintWidth);
        }

        /// <summary>
        /// (^PR_^PW) 设定打印的宽度打印速度使用默认值
        /// </summary>
        /// <param name="PrintWidth"></param>
        /// <returns></returns>
        public string _SetPrintRateAndWidth(int PrintWidth)
        {
            return this._SetPrintRateAndWidth(3, 6, 6, PrintWidth);
        }

        /// <summary>
        /// (^FO)设置字段的位置,相对于由^LH命令指定的标签原点
        /// </summary>
        /// <param name="x">Number of Dots along X-axis(Default value: = 0,Acceptable values: 0 - 9999)</param>
        /// <param name="y">Number of Dots along Y-axis(Default value: = 0,Acceptable values: 0 - 9999)</param>
        /// <returns></returns>
        public string _SetFieldOrigin(int x, int y)
        {
            string _fo = string.Format("^FO{0},{1}", x, y);
            return _fo.ToUpper();
        }

        /// <summary>
        /// Code 128 Bar Code (^BC)
        /// </summary>
        /// <param name="o">字体方向  //[N = 正常 (Normal), R = 顺时针旋转90度(Roated), I = 顺时针旋转180度(Inverted), B = 顺时针旋转270度 (Bottom)]</param>
        /// <param name="h">条码高度 // [默认值:由^BY设置 其他值:1到9999点]</param>
        /// <param name="f">打印注释行  //[ 默认值: Y = 打印(Yes)其他值:N = 不打印(No]</param>
        /// <param name="g">将注释行打印在条码上方  //[ 默认值: N = 不打印在条码上方其他值: Y = 打印在条码上方]</param>
        /// <param name="e"> 打印UCC校验位  // 默认值:Y = 打印(Yes)其他值:N = 不打印(No)</param>
        /// <param name="m">= 模式  //默认值:N = 不选择模式, 其他值:U = UCC匹配模式></param>
        /// <returns></returns>
        public string _BCCode128(string o, int h, string f, string g, string e, string m)
        {
            string _bc = string.Format("^BC{0},{1},{2},{3},{4},{5}", o, h, f, g, e, m);
            return _bc.ToUpper();
        }

        /// <summary>
        /// Code 128 Bar Code(^BC)
        /// </summary>
        /// <param name="o">字体方向  //[N = 正常 (Normal), R = 顺时针旋转90度(Roated), I = 顺时针旋转180度(Inverted), B = 顺时针旋转270度 (Bottom)]</param>
        /// <param name="h">条码高度 // [默认值:由^BY设置 其他值:1到9999点]</param>
        /// <param name="f">打印注释行  //[ 默认值: Y = 打印(Yes)其他值:N = 不打印(No]</param>
        /// <param name="g">将注释行打印在条码上方  //[ 默认值: N = 不打印在条码上方其他值: Y = 打印在条码上方]</param>
        /// <param name="e"> 打印UCC校验位  // 默认值:Y = 打印(Yes)其他值:N = 不打印(No)</param>
        /// <returns></returns>
        public string _BCCode128(string o, int h, string f, string g, string e)
        {
            return this._BCCode128(o, h, f, g, e, "N").ToUpper();
        }

        /// <summary>
        /// (^FD) 字段数据
        /// </summary>
        /// <param name="data">打印的数据(字段数据串最多3072字符)</param>
        /// <returns></returns>
        public string _SetFieldData(string data)
        {
            string _fd = string.Format("^FD{0}", data);
            return _fd;
        }

        /// <summary>
        /// (^FH) 字段的十六进制表示(指令允许你在^FD语句里直接输入任何十六进制值。^FH指令必须在每个^FD指令前才能用)在^FD语句里,十六进制标识必须在每个十六进制值前加入(_)。缺省的十六进制标识是下划线(_)。这指令可以用在任何有数据段的指令里,(如^FD,^FV(段变量),和^SN(串行数据)
        /// </summary>
        /// <returns></returns>
        public string _FieldHex()
        {
            return "^FH".ToUpper();
        }

        /// <summary>
        ///  (^SN) 连续数据指令
        /// </summary>
        /// <param name="StartingValue">起始值</param>
        /// <param name="IncrementValue">增加/减少值</param>
        /// <param name="LeadingZeros">如需要加引导零. 缺省值:N=不 ;其它值:Y=是</param>
        /// <returns></returns>
        public string _SetSerializationData(string StartingValue, int IncrementValue, string LeadingZeros)
        {
            string _sn = string.Format("^SN{0},{1},{2}", StartingValue, IncrementValue, LeadingZeros.ToUpper());
            return _sn;
        }

        /// <summary>
        ///(^PQ) 打印总数
        /// </summary>
        /// <param name="q">数量(Total Quantity of Labels to Print)</param>
        /// <returns></returns>
        public string _SetPrintQueantity(int q)
        {
            string _pq = string.Format("^PQ{0}", q);
            return _pq.ToUpper();
        }

        /// <summary>
        /// (^PQ)打印总数
        /// {Exemples: ^PQ50,10,1,Y:---- Print a total quantity of 50 labels with one replicate
        ///of each serial number. Print the total quantity in groups of 10, but do
        ///not pause after every group.}
        /// </summary>
        /// <param name="q">Total Quantity of Labels to Print
        /// ;Default value: 1
        ///;Acceptable values: 1 - 99,999,999</param>
        /// <param name="p">Pause (‘Group’) Count;
        /// Default value: 0 = no pause
        ///Acceptable values: 0 - 99,999,999 labels between pauses
        /// </param>
        /// <param name="r">Replicates of Each Serial Number;
        /// Default value: 0 = no replicates
        ///Acceptable values: 0 - 99,999,999 replicates
        /// </param>
        /// <param name="o">Override Pause Count;
        /// Default value: N = No
        ///Other value: Y = Yes
        /// </param>
        /// <returns></returns>
        public string _SetPrintQueantity(int q, int p, int r, string o)
        {
            return string.Format("^PQ{0},{1},{2},{3}", q, p, r, o);
        }

        /// <summary>
        /// (^PM)Print Mirror Image of Lable(
        /// NOTE: The ^PM will remain active unless turned off by ^PMN
        ///instruction or the printer is powered down.)
        /// </summary>
        /// <param name="a">Mirror Print Entire Label
        ///Y = Yes
        ///N = No {I.V.P. = N}</param>
        /// <returns></returns>
        public string _SetMirrorImageLable(string a)
        {
            return string.Format("^PM{0}", a);
        }

        /// <summary>
        /// (^PO)Print Orientation
        /// </summary>
        /// <param name="a">a = Invert 180 Degrees
        ///N = Normal {I.V.P. = N}
        ///I = Invert</param>
        /// <returns></returns>
        public string _SetPrintOrientation(string a)
        {
            return string.Format("^PO{0}", a);
        }

        /// <summary>
        /// (^GF)Graphic Field(图片打印)
        /// </summary>
        /// <param name="CompressionType">
        /// Default:ASCII
        /// Value:
        /// A = ACSII Hex:
        /// This follows the conventional download format
        /// used for all other download commands.
        /// B = Binary:
        /// The data sent to the printer after the ‘c’ parameter
        /// is strictly binary. 
        /// C = Compression Binary :
        /// The data sent after parameter ‘c’ is in a compressed
        /// binary format. The data is compressed on
        /// the host side using a compression algorithm supplied
        /// by Zebra. The data is then decompressed
        /// and placed directly in the bitmap.
        /// </param>
        /// <param name="BinaryByteCount">
        /// Binary Byte Count
        /// Default:Note-entire command is ignored when not specified
        /// Value:Total number of bytes 
        /// Range:1 to 99999
        /// </param>
        /// <param name="GraphicFieldCount">
        /// Graphic Field Count
        /// </param>
        /// <param name=";ByteperRow">
        /// Bytes per Row
        /// </param>
        /// <param name="strData">
        /// Default:None=must be specified
        /// ASCII Hex Data:
        /// </param>
        /// <returns></returns>
        public string _SetGraphicField(string CompressionType, string BinaryByteCount,
            string GraphicFieldCount, string ByteperRow, string strData)
        {
            return string.Format("^GF{0},{1},{2},{3},{4}", CompressionType.ToUpper(), BinaryByteCount, GraphicFieldCount, ByteperRow, strData);
        }

        public string _SetFieldNumber(int i)
        {
            return string.Format("^FN{0}", i);
        }
        public string _SetRecallFormat(string FieldName)
        {
            return string.Format("^XF{0}", FieldName);
        }

        /// <summary>
        ///(^FWr) Set Field Orientation
        /// </summary>
        /// <param name="Orig">Rotate Field
        /// N = Normal {I.V.P. = N}
        /// R = Rotated 90 degrees;
        /// I = Inverted (180 degrees);
        /// B = Bottom Up (270 degrees read from bottom up).
        /// </param>
        /// <returns></returns>
        public string _SetFieldOrientation(string Orig)
        {
            return string.Format("^FW{0}", Orig);
        }

    }
}

本文转载自:http://blog.csdn.net/smartsmile2012/article/details/22198851

共有 人打赏支持
深圳大道
粉丝 3
博文 877
码字总数 0
作品 0
深圳
架构师
私信 提问
C#打印功能的详细说明

我们谈到C#打印和C#打印预览的实现其中主要就是包括:页面设置、打印预览、打印三大部分。打印的原理是:生成mdi文件,系统碰到mdi的时候会自动以打印的方式处理。所以,不管用什么模板,什么...

andrewniu
2017/11/20
0
0
C#枚举系统安装的所有打印机

在下面的程序中我们将把系统中所安装的打印机用列表框列出来,同时为默认打印机设置缺省值。 在下面的程序中我们用到了两个主要的类,把所有的打印机列表出来用到了PrinterSettings 类,获取系...

晨曦之光
2012/03/09
201
0
如何用C#语言实现虚拟打印机的驱动开发?

我需要利用C#语言开发一个虚拟打印机的驱动开发,无从下手。网上找了一些文章类资料。但大都是些只言片语类的介绍。谁开发过或有相关的资料,请大家帮忙提供些信息给我。

一学修行
2015/08/20
1K
1
ICE专题:使用C#编写ICE分布式应用程序

原文来自blogCentaur 随笔录的 使用C#编写Ice应用程序,原文程序中没有注释,我参照马维达翻译的ICE分布式程序设计Ice-1.3.0-C.pdf,里面的代码有C++和Java的,没有C#的,计划平时有空学习I...

老朱教授
2017/10/16
0
0
『水晶报表』使用 水晶报表 实现打印

在我们开发各种工具软件的时候,我们不可避免的会遇到打印的问题。而使用.NET开发打印功能,水晶报表或许会是一个十分不象错的选择! 一般步骤: 准备好想要打印的数据源; 制作用于规定打印...

灰大羊
2016/07/05
55
0

没有更多内容

加载失败,请刷新页面

加载更多

容器服务

简介 容器服务提供高性能可伸缩的容器应用管理服务,支持用 Docker 和 Kubernetes 进行容器化应用的生命周期管理,提供多种应用发布方式和持续交付能力并支持微服务架构。 产品架构 容器服务...

狼王黄师傅
昨天
3
0
高性能应用缓存设计方案

为什么 不管是刻意或者偶尔看其他大神或者大师在讨论高性能架构时,自己都是认真的去看缓存是怎么用呢?认认真真的看完发现缓存这一块他们说的都是一个WebApp或者服务的缓存结构或者缓存实现...

呼呼南风
昨天
12
0
寻找一种易于理解的一致性算法(扩展版)

摘要 Raft 是一种为了管理复制日志的一致性算法。它提供了和 Paxos 算法相同的功能和性能,但是它的算法结构和 Paxos 不同,使得 Raft 算法更加容易理解并且更容易构建实际的系统。为了提升可...

Tiny熊
昨天
2
0
聊聊GarbageCollectionNotificationInfo

序 本文主要研究一下GarbageCollectionNotificationInfo CompositeData java.management/javax/management/openmbean/CompositeData.java public interface CompositeData { public Co......

go4it
昨天
3
0
阿里云ECS的1M带宽理解

本文就给大家科普下阿里云ECS的固定1M带宽的含义。 “下行带宽”和“上行带宽” 为了更好的理解,需要先给大家解释个词“下行带宽”和“上行带宽”: 下行带宽:粗略的解释就是下载数据的最大...

echojson
昨天
10
0

没有更多内容

加载失败,请刷新页面

加载更多

返回顶部
顶部