文档章节

ubuntu 14.04 VSFTPD 匿名FTP服务器 配置文件

renwofei423
 renwofei423
发布于 2015/11/26 23:23
字数 888
阅读 150
收藏 2
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone?  vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=YES
#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES
#
# Allow anonymous FTP? (Disabled by default)
anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES

#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
anon_mkdir_write_enable=YES
anon_other_write_enable=YES
anon_world_readable_only=NO
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# If enabled, vsftpd will display directory listings with the time
# in  your  local  time  zone.  The default is to display GMT. The
# times returned by the MDTM FTP command are also affected by this
# option.
#use_localtime=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to  FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories.  See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
#chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
#chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# Customization
#
# Some of vsftpd's settings don't fit the filesystem layout by
# default.
#
# This option should be the name of a directory which is empty.  Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd/empty
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
# This option specifies the location of the RSA key to use for SSL
# encrypted connections.
rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key




本文转载自:http://blog.csdn.net/sshhaayyuuee/article/details/25023609

renwofei423
粉丝 67
博文 54
码字总数 8590
作品 0
长沙
技术主管
私信 提问
上传文件到linux - ubuntu

我们经常需要将本地的文件上传到远程的Ubuntu 14.04服务器上,或者把远程Ubuntu 14.04服务器上的文件下载到本地,这就需要用到vsftpd来搭建FTP服务,现在介绍一下如何在Ubuntu 14.04上安装和...

岸芷汀兰
2015/06/19
4.5K
1
在Ubuntu 14.04上安装搭建FTP服务器详解

今天要做一个网络日志的迁移程序,搬文件的话,想来想去还是用FTP吧。FTP用于通过TCP网络从一台主机向另外一台主机传送文件。这篇文章解说了怎样在Ubuntu 14.04上安装FTP服务器。流行的FTP服...

微笑的江豚
2016/09/04
125
0
在pcduino上简单搭ftp服务器

ubuntu下用vsftpd 安装: sudo apt-get install vsftpd 启动/停止/重启/状态: sudo service vsftpd start/stop/restart/status 配置文件目录: /etc/vsftpd.conf 配置文件里的英文注释很好的...

pc朵拉
2013/07/03
190
0
Ubuntu server 14.04下安装以及配置vsftpd

Ubuntu server 14.04下安装以及配置vsftpd 废话不多说,直接安装 配置目标:一个不能本地登录的用户使用密码登陆ftp,禁止匿名登陆上传以及下载 注析掉以下行的"#" 在文本末新增以下行 因为设...

W_Lu
2015/12/10
94
0
Ubuntu下搭建FTP服务器

后台一直提示wordperss版本和插件有更新,看着碍眼,决定把它们全都更新。不过更新文件需要服务器提供FTP服务,linode也没有提供到FTP,只能自己装一个了。我装的服务器系统是Ubuntu 12.04 ...

aaccee12
2015/01/29
0
0

没有更多内容

加载失败,请刷新页面

加载更多

以GPS为例,深入浅出讲解射频接收路径的匹配调试流程

RF接收路径的匹配流程----以GPS为例 调Matching前,至少准备两块板子。 一块完整PCB,有上全部零件 : 一块裸版,完全都没上零件 : 匹配前注意事项—铜管 可能很多人忽略这点,但其实这才是...

demyar
8分钟前
1
0
TI AM570x浮点DSP C66x + ARM Cortex-A15开发板的LCD触摸屏接口、LED指示灯

TL570x-EVM是一款由创龙基于SOM-TL570x核心板设计的开发板,它为用户提供了SOM-TL570x核心板的测试平台,用于快速评估SOM-TL570x核心板的整体性能。 TL570x-EVM底板采用沉金无铅工艺的4层板设...

Tronlong创龙
9分钟前
2
0
docker部署springboot项目

前提条件: 1.可以运行jar包的环境 2.机器上已经安装了docker 3.准备部署的springboot的jar包 4.Dockerfile文件 首先在xshell中连接服务器,然后再创建docker_test,在docker_test下创建jar...

故久呵呵
14分钟前
2
0
MaxCompute问答整理之10月

本文是基于本人对MaxCompute产品的学习进度,再结合开发者社区里面的一些问题,进而整理成文。希望对大家有所帮助。 问题一、DataStudio中是否可以通过shell节点调取MaxCompute sql语句? 不...

一肥仔
14分钟前
1
0
GMAT阅读高速解题6招秘籍分享

在做GMAT阅读题时,你是否曾因为文章内容无聊昏昏欲睡?是否看到第二段就神游不知所云?又是否看完问题选择觉得似乎每个都是正确答案?如果上面这些情况曾经发生在你身上,那么你的阅读方式和心...

bole6
16分钟前
2
0

没有更多内容

加载失败,请刷新页面

加载更多

返回顶部
顶部