文档章节

Apache 2.4.8的httpd.conf的配置信息

FeanLau
 FeanLau
发布于 02/08 00:19
字数 2498
阅读 39
收藏 0

httpd -v查看配置信息的

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo_log"
# with ServerRoot set to "/Applications/MAMP/Library" will be interpreted by the
# server as "/Applications/MAMP/Library/logs/foo_log".

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/Applications/MAMP/Library"

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
<IfModule !mpm_netware.c>
PidFile logs/httpd.pid
</IfModule>

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 8888

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule bucketeer_module modules/mod_bucketeer.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule echo_module modules/mod_echo.so
LoadModule case_filter_module modules/mod_case_filter.so
LoadModule case_filter_in_module modules/mod_case_filter_in.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule fastcgi_module modules/mod_fastcgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule perl_module modules/mod_perl.so
LoadModule wsgi_module modules/mod_wsgi.so
LoadModule xsendfile_module modules/mod_xsendfile.so

LoadModule php5_module        /Applications/MAMP/bin/php/php5.4.45/modules/libphp5.so

#
AddType application/x-httpd-php .php .phtml

<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User #-1
Group #-1

</IfModule>
</IfModule>

<IfModule xsendfile_module>
	XSendFile on
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin you@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:8888

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
# MAMP DOCUMENT_ROOT !! Don't remove this line !!
DocumentRoot "/Applications/MAMP/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    Options Indexes FollowSymLinks
    AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/Applications/MAMP/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options All

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all
    
    XSendFilePath "/Applications/MAMP/htdocs"
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html index.php

    <IfModule perl_module>
        DirectoryIndex index.pl
    </IfModule>

    <IfModule wsgi_module>
        DirectoryIndex index.wsgi index.py
    </IfModule>

</IfModule>

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride 
# directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

<Files ~ "^\.DS_Store">
    Order allow,deny
    Deny from all
</Files>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "/Applications/MAMP/logs/apache_error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel error

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog "/Applications/MAMP/logs/apache_access.log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "/Applications/MAMP/logs/apache_access.log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
	#
	# We include the /icons/ alias for FancyIndexed directory listings.  If you
	# do not use FancyIndexing, you may comment this out.
	#
	
	Alias /favicon.ico "/Applications/MAMP/bin/favicon.ico"
	
	Alias /icons/ "/Applications/MAMP/Library/icons/"
	
	<Directory "/Applications/MAMP/Library/icons">
		Options Indexes MultiViews
		AllowOverride None
		Order allow,deny
		Allow from all
	</Directory>
	
	Alias /phpMyAdmin "/Applications/MAMP/bin/phpMyAdmin"
	Alias /phpmyadmin "/Applications/MAMP/bin/phpMyAdmin"
	
	<Directory "/Applications/MAMP/bin/phpMyAdmin">
		Options Indexes MultiViews
		AllowOverride None
		Order allow,deny
		Allow from all
	</Directory>
	
	Alias /phpPgAdmin "/Applications/MAMP/bin/phpPgAdmin"
	Alias /phppgadmin "/Applications/MAMP/bin/phpPgAdmin"
	
	<Directory "/Applications/MAMP/bin/phpPgAdmin">
		Options Indexes MultiViews
		AllowOverride None
		Order allow,deny
		Allow from all
	</Directory>
	
	Alias /phpLiteAdmin "/Applications/MAMP/bin/phpLiteAdmin"
	Alias /phpliteadmin "/Applications/MAMP/bin/phpLiteAdmin"
	
	<Directory "/Applications/MAMP/bin/phpLiteAdmin">
		Options Indexes MultiViews
		AllowOverride None
		Order allow,deny
		Allow from all
	</Directory>
	
	Alias /MAMP "/Applications/MAMP/bin/mamp"
	
	<Directory "/Applications/MAMP/bin/mamp">
		Options Indexes MultiViews
		AllowOverride None
		Order allow,deny
		Allow from all
	</Directory>
	
	Alias /adminer "/Applications/MAMP/bin/adminer"

	<Directory "/Applications/MAMP/bin/adminer">
		DirectoryIndex adminer.php
		Options Indexes MultiViews
		AllowOverride None
		Order allow,deny
		Allow from all
	</Directory>

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/Applications/MAMP/cgi-bin/"

    Alias /perl/ "/Applications/MAMP/cgi-bin/"

    <IfModule perl_module>
        PerlModule ModPerl::Registry
        <Location /perl>
            SetHandler perl-script
            PerlResponseHandler ModPerl::Registry
            PerlOptions +ParseHeaders
            Options +ExecCGI
        </Location>
    </IfModule>
</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
</IfModule>

#
# "/Applications/MAMP/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/Applications/MAMP/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig /Applications/MAMP/conf/apache/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi .pl

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
<IfModule mime_magic_module>
	MIMEMagicFile /Applications/MAMP/conf/apache/magic
</IfModule>

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the /Applications/MAMP/conf/apache/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
#Include /Applications/MAMP/conf/apache/extra/httpd-mpm.conf

# Multi-language error messages
#Include /Applications/MAMP/conf/apache/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include /Applications/MAMP/conf/apache/extra/httpd-autoindex.conf

# Language settings
#Include /Applications/MAMP/conf/apache/extra/httpd-languages.conf

# User home directories
#Include /Applications/MAMP/conf/apache/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include /Applications/MAMP/conf/apache/extra/httpd-info.conf

# Virtual hosts
#Include /Applications/MAMP/conf/apache/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include /Applications/MAMP/conf/apache/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include /Applications/MAMP/conf/apache/extra/httpd-dav.conf

# Various default settings
#Include /Applications/MAMP/conf/apache/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include /Applications/MAMP/conf/apache/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup file:/dev/urandom 1024
SSLRandomSeed connect file:/dev/urandom 1024
    
#
# Uncomment the next line if Apache should not accept SSLv3 connections, to learn more google for "POODLE SSLv3".
# SSLProtocol All -SSLv2 -SSLv3 
</IfModule>

 

© 著作权归作者所有

共有 人打赏支持
FeanLau
粉丝 3
博文 219
码字总数 117077
作品 0
浦东
程序员
ZABBIX 监控Linux Http 服务器

一、系统环境 Zabbix Server:2.4.8 WEB服务器:httpd-2.4.6-40.el7.centos.x86_64 模板以及脚本:http://pan.baidu.com/s/1hsDBZAs 二、配置httpd.conf [root@localhost bin]# vim /etc/htt......

黄炜斌
2016/04/24
123
0
测试centos7安装zabbix3.4

环境:centos7 x64 1501 实验ip为:192.168.31.77 1.安装必须软件包 yum -y install httpd mariadb mariadb-server php php-gd php-mysql php php-gd php-mysql php-bcmath php-mbstring 修改......

lcpljc
2017/12/19
0
0
Apache HTTP Server 2.4.8 发布

Web服务器Apache 2.4.8发布.2014-03-11之前版本2013-11-19的2.4.7。修正大量Bug.按惯例先在开发目录放出。然后移动到正式目录。2.4是目前官方推荐产品系列。遗留产品线2.2.26/2.0.65.1.3已停...

fei
2014/03/12
3.2K
11
CentOS6配置部署Zabbix监控

硬件配置 * 2cpu, 4Gmem, 40Gdisk * Zabbix Server: 200.21.101.14/centos651 * Zabbix Client: 200.21.101.15/centos652 禁用selinux,改完配置重启系统生效 添加zabbix软件源 rpm -ivh htt......

牛皮糖
2016/07/28
62
0
apache解析python显示源代码如何解决

我的apache版本信息(其实我是直接用了wampserver): 我的python版本(我查过我的版本也是VC9编译的): 我用的mod_wsgi.so版本是: 在apache的httpd.conf配置后,服务器可以顺利启动,没问...

源稚竹
2015/10/18
469
0

没有更多内容

加载失败,请刷新页面

加载更多

Java动态代理之InvocationHandler最简单的入门教程

网上关于Java的动态代理,Proxy和InvocationHandler这些概念有讲解得非常高深的文章。其实这些概念没有那么复杂。现在咱们通过一个最简单的例子认识什么是InvocationHandler。值得一提的是,...

JerryWang_SAP
25分钟前
0
0
oracle 在 MyBatis 中使用 like

两种使用方法 使用oracle自带 || 拼凑的方式 <if test="userName!=null and userName!=''"> AND u.USER_NAME like '%' || #{userName} || '%' </if> 使用MyBatis的$符号的方式 <if test="us......

karma123
31分钟前
1
0
带接口的webservice方式发布

package cn.it.ws.e;import javax.jws.WebService;/** * 面向接口的webservice发布方式 * @author Administrator * */@WebServicepublic interface JobService {publi...

江戸川
46分钟前
2
0
day122-20181020-英语流利阅读-待学习

蜘蛛侠新片《毒液》来袭!导演灵感来自哪? Roxy 2018-10-20 1.今日导读 你还记得漫威宇宙中飞檐走壁的蜘蛛侠小可爱吗?在刚过去的国庆黄金周里,索尼影业发行的漫威超级英雄蜘蛛侠系列大片《...

飞鱼说编程
57分钟前
4
0
美团点评Docker容器管理平台

美团点评容器平台简介 本文介绍美团点评的Docker容器集群管理平台(以下简称“容器平台”)。该平台始于2015年,是基于美团云的基础架构和组件而开发的Docker容器集群管理平台。目前该平台为...

Skqing
今天
6
0

没有更多内容

加载失败,请刷新页面

加载更多

返回顶部
顶部