文档章节

QEMU ChangeLog/1.2

如比如比
 如比如比
发布于 2012/09/06 19:41
字数 631
阅读 71
收藏 0


System emulation

All targets
... QMP error changes go here ...
File descriptors can be passed to qemu using the new add-fd/remove-fd QMP commands. It is intended that they can be used in any place where QEMU would expect a file name. This is ensured for disk images, support in other parts of QEMU may still be inconsistent.
 
ARM
LPAE (large physical address extensions) are now supported for the Cortex-A15 CPU; you can now run a vexpress-a15 model with more than 4GB of RAM
 The new monitor command "dump-guest-memory" creates an ELF dump of the guest memory.
 New board model: i.MX31

PowerPC
The pSeries target correctly creates segment size device tree nodes (fixes odd bugs with HV vs PR KVM)
 The pSeries target implements an IOMMU.
... pSeries VGA, USB, etc.? ...
The E500 target generates its device tree dynamically
New mpc8544ds -machine option: dumpdtb. This allows to dump the dynamically generated device tree to a file.
 Emulation for e5500 cores
PC87312 Super I/O chipset emulation for PReP, adding parallel port to prep machine
 
x86
Support for PCI passthrough is available for Xen fully-virtualized domains.
The new monitor command "dump-guest-memory" creates an ELF dump of the guest memory.
 When using KVM, the in-kernel APIC supports MSI.
The "cpudef" config file section is being deprecated and may be removed in v1.3.
 
Device emulation
VGA and QXL cards (obtained with -vga std and -vga qxl) have 16 MB of VRAM rather than 8 MB.
 Three new SCSI host bus adapter devices are available: am53c974 and dc390 emulate respectively an AMD PCI PCscsi and a Tekram DC-390 device, both of which are supported on older operating systems including MS DOS 6.2, MS Windows 3.11, 98 SE, NT 3.1 and NT 4.0. megasas emulated an LSI SAS1078 RAID controller. The next version of SeaBIOS will support booting from am53c974 and dc390 disks.
 An USB-attached SCSI controller is now available.

Audio devices
The PC speaker audio card is now available by default.

Network devices
The guestfwd argument to slirp now supports running an arbitrary command on every TCP connection (as in inetd). This is invoked by specifying a target that starts with "cmd:".
 
Block devices
Emulated IDE and SCSI as well as virtio-blk devices can now switch the cache mode between writethrough and writeback. virtio-blk automatically switches to writethrough if the guest driver doesn't support flushes.
 The default cache mode for images is now writeback.
Emulated SCSI devices can be given a custom vendor name, product name and WWN.
Improved support for passthrough of SCSI tapes and media changers.
libiscsi can be used together with scsi-generic to pass iSCSI tapes and media changers to the guest.
 When raw files are streamed, parts of the files that are holes in the underlying filesystem are treated as unallocated (as long as the OS supports either the FIEMAP ioctl or the SEEK_HOLE/SEEK_DATA modes)
 CD-ROM drives can now be used with AHCI

qcow2
qcow2 images support a new option, lazy_refcounts. If on, the speed of cache=writethrough mode will be improved, at the cost of requiring an fsck-like pass (and thus QEMU 1.2) to use the image again after a power loss.
 qemu-img check can now repair qcow2 and QED images with the new -r option.

VMDK
Support for images in the streamOptimized subformat has been fixed. This is a VMDK subformat commonly used with OVF appliances.
 
rbd
rbd no longer ignores the cache setting

Live Migration, Save/Restore
Migration works much better with guests with large memory.
USB mass storage and passthrough devices support live migration.

VNC
The threaded VNC server is now enabled by default.

Guest agent
A new command "fstrim" was added to the guest agent.

New targets
OpenRISC is now supported for both user-mode and system emulation.

Build dependencies
No changes from 1.1.0.

© 著作权归作者所有

如比如比
粉丝 126
博文 178
码字总数 286951
作品 0
日本
程序员
私信 提问
QEMU 1.7.0 发布,开源模拟器

QEMU 团队今天很高兴的宣布 QEMU 1.7 发布了,该版本包含来自 126 名开发者的超过 1300 项改变。 下载地址: http://wiki.qemu.org/download/qemu-1.7.0.tar.bz2 完整的改进记录: http://w...

oschina
2013/12/11
3K
9
QEMU 1.3 发布,模拟处理器

QEMU 1.3 发布了,下载地址:qemu-1.3.0.tar.bz2 完整改进记录请看:http://wiki.qemu.org/ChangeLog/1.3 值得关注的内容有: QEMU是一套由Fabrice Bellard所编写的模拟处理器的自由软件。它...

oschina
2012/12/04
1K
6
QEMU 2.0 发布,开源系统模拟器

QEMU 2.0 发布了,下载地址: http://wiki.qemu.org/download/qemu-2.0.0.tar.bz2 QEMU是一套由Fabrice Bellard所编写的模拟处理器的自由软件。它与Bochs,PearPC近似,但其具有某些后两者所...

oschina
2014/04/18
5.2K
13
QEMU 2.4.0-rc0 版发布,开源模拟器

QEMU 2.4.0-rc0 版发布了,该版本包含一些不兼容老版本的内容,而且还会越来越多,详细的改进记录请看 ChangeLog 下载地址:Download QEMU是一套由Fabrice Bellard所编写的模拟处理器的自由软...

如比如比
2015/07/10
1K
0
QEMU 1.6.0 发布,处理器模拟软件

QEMU是一套由Fabrice Bellard所编写的模拟处理器的自由软件。它与Bochs,PearPC近似,但其具有某些后两者所不具备的特性,如高速度及跨平台的特性。经由kqemu这个开源的加速器,QEMU能模拟至...

oschina
2013/08/16
3.8K
3

没有更多内容

加载失败,请刷新页面

加载更多

关于PHP处理Json数据的例子

本文转载于:专业的前端网站➜关于PHP处理Json数据的例子 最近工作需要在原来静态看板(大屏)页面的基础上,实现数据的动态展示,而且需要定时刷新。 接到任务后就马不停蹄的开始修改页面: ...

前端老手
17分钟前
3
0
Archiva 不小心删掉了管理员权限怎么办

Archiva 的界面和 UI 比较容易出问题。 在添加用户和为用户进行权限修改的时候,不小心连 admin 这个用户的权限都删掉了。 这个时候应该如何恢复 admin 这个用户的权限? 这个时候你可以尝试...

honeymoose
今天
7
0
Java8新特性之空指针异常的克星Optional类

Java8新特性系列我们已经介绍了Stream、Lambda表达式、DateTime日期时间处理,最后以“NullPointerException” 的克星Optional类的讲解来收尾。 背景 作为开发人员每天与NullPointerExceptio...

程序新视界
今天
5
0
OSChina 周四乱弹 —— 福布斯终身秃头奖

Osc乱弹歌单(2019)请戳(这里) 【今日歌曲】 @宇辰OSC :分享如是我闻的单曲《地藏经上卷》: 如是我闻#今日歌曲推荐# 《地藏经上卷》- 如是我闻 手机党少年们想听歌,请使劲儿戳(这里) ...

小小编辑
今天
761
12
Mybatis Plus删除

/** @author beth @data 2019-10-17 00:30 */ @RunWith(SpringRunner.class) @SpringBootTest public class DeleteTest { @Autowired private UserInfoMapper userInfoMapper; /** 根据id删除......

一个yuanbeth
今天
7
0

没有更多内容

加载失败,请刷新页面

加载更多

返回顶部
顶部