文档章节

读官方指南经历Mysql5.6服务安装

secondriver
 secondriver
发布于 2015/09/17 09:11
字数 1531
阅读 21
收藏 1

   上一次安装完成Mysql5.6服务,一段时间后发生异常,Mysql服务无法启动进程终止: 1067;网上找了好多方法还是没能解决这个问题,今天重新安装Mysql5.6,同样出现这个问题,后来通过阅读

MySQL 5.6 Reference Manual Including MySQL Cluster NDB 7.3 Reference Guide

这个问题最终得以解决了。

  下面是安装Mysql On Windows 解压安装方式。

  1. 下载Mysql安装包:mysql-5.6.12-win32.zip;

  2. 解压安装到D:\__dev下;

  3. 添加环境变量,创建MYSQL_HOME变量,

    MYSQL_HOME=D:\__dev\mysql-5.6.12-win32

    配置Path路径,、bin

    %MYSQL_HOME%\bin;
  4. 修改mysql-5.6.12-win32下的my-default.ini文件


#Path to installation directory. All paths are usually resolved relative to this.
#basedir="C:/Program Files/MySQL/MySQL Server 5.0/"
basedir = D:/__dev/mysql-5.6.12-win32
#Path to the database root
#datadir="C:/Program Files/MySQL/MySQL Server 5.0/Data/"
datadir = D:/__dev/mysql-5.6.12-win32/data

  如上图配置basedir和datadir.

  在开发指南上有精简配置如下图:


5. 使用管理员权限运行命令窗口,切换工作目录为Path目录下,安装Mysql服务

mysqld -install
出现Service successfully installed.
表示安装服务成功


6. 启动mysql服务

net start mysql

7.登录到mysql,并修改root用户密码,默认为空

mysql>mysq -uroot
mysql>update mysql.user set password=PASSWORD('root') where User='root'

问题解决了,mysql5.6的配置文件在安装目录下,名字已经变为my-default.ini.

详细配置信息如下:

[client]
port=3306
[mysql]
#default-character-set=latin1
default-character-set=utf8
[mysqld]
# The TCP/IP Port the MySQL Server will listen on
port=3306
#log-error=c:\error.log
#Path to installation directory. All paths are usually resolved relative to this.
#basedir="C:/Program Files/MySQL/MySQL Server 5.0/"
basedir = D:/__dev/mysql-5.6.12-win32
#Path to the database root
#datadir="C:/Program Files/MySQL/MySQL Server 5.0/Data/"
datadir = D:/__dev/mysql-5.6.12-win32/data
# The default character set that will be used when a new schema or table is
# created and no character set is defined
default-character-set=utf8
# The default storage engine that will be used when create new tables when
default-storage-engine=INNODB
# Set the SQL mode to strict
sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"
# The maximum amount of concurrent sessions the MySQL server will
# allow. One of these connections will be reserved for a user with
# SUPER privileges to allow the administrator to login even if the
# connection limit has been reached.
max_connections=100
# Query cache is used to cache SELECT results and later return them
# without actual executing the same query once again. Having the query
# cache enabled may result in significant speed improvements, if your
# have a lot of identical queries and rarely changing tables. See the
# "Qcache_lowmem_prunes" status variable to check if the current value
# is high enough for your load.
# Note: In case your tables change very often or if your queries are
# textually different every time, the query cache may result in a
# slowdown instead of a performance improvement.
query_cache_size=0
# The number of open tables for all threads. Increasing this value
# increases the number of file descriptors that mysqld requires.
# Therefore you have to make sure to set the amount of open files
# allowed to at least 4096 in the variable "open-files-limit" in
# section [mysqld_safe]
table_cache=256
# Maximum size for internal (in-memory) temporary tables. If a table
# grows larger than this value, it is automatically converted to disk
# based table This limitation is for a single table. There can be many
# of them.
tmp_table_size=15M
# How many threads we should keep in a cache for reuse. When a client
# disconnects, the client's threads are put in the cache if there aren't
# more than thread_cache_size threads from before.  This greatly reduces
# the amount of thread creations needed if you have a lot of new
# connections. (Normally this doesn't give a notable performance
# improvement if you have a good thread implementation.)
thread_cache_size=8
#*** MyISAM Specific options
# The maximum size of the temporary file MySQL is allowed to use while
# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
# If the file-size would be bigger than this, the index will be created
# through the key cache (which is slower).
myisam_max_sort_file_size=100G
# If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method.  This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_max_extra_sort_file_size=100G
# If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method.  This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_sort_buffer_size=30M
# Size of the Key Buffer, used to cache index blocks for MyISAM tables.
# Do not set it larger than 30% of your available memory, as some memory
# is also required by the OS to cache rows. Even if you're not using
# MyISAM tables, you should still set it to 8-64M as it will also be
# used for internal temporary disk tables.
key_buffer_size=22M
# Size of the buffer used for doing full table scans of MyISAM tables.
# Allocated per thread, if a full scan is needed.
read_buffer_size=64K
read_rnd_buffer_size=256K
# This buffer is allocated when MySQL needs to rebuild the index in
# REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE
# into an empty table. It is allocated per thread so be careful with
# large settings.
sort_buffer_size=256K
#*** INNODB Specific options ***
# Use this option if you have a MySQL server with InnoDB support enabled
# but you do not plan to use it. This will save memory and disk space
# and speed up some things.
#skip-innodb
# Additional memory pool that is used by InnoDB to store metadata
# information.  If InnoDB requires more memory for this purpose it will
# start to allocate it from the OS.  As this is fast enough on most
# recent operating systems, you normally do not need to change this
# value. SHOW INNODB STATUS will display the current amount used.
innodb_additional_mem_pool_size=2M
# If set to 1, InnoDB will flush (fsync) the transaction logs to the
# disk at each commit, which offers full ACID behavior. If you are
# willing to compromise this safety, and you are running small
# transactions, you may set this to 0 or 2 to reduce disk I/O to the
# logs. Value 0 means that the log is only written to the log file and
# the log file flushed to disk approximately once per second. Value 2
# means the log is written to the log file at each commit, but the log
# file is only flushed to disk approximately once per second.
innodb_flush_log_at_trx_commit=1
# The size of the buffer InnoDB uses for buffering log data. As soon as
# it is full, InnoDB will have to flush it to disk. As it is flushed
# once per second anyway, it does not make sense to have it very large
# (even with long transactions).
innodb_log_buffer_size=1M
# InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and
# row data. The bigger you set this the less disk I/O is needed to
# access data in tables. On a dedicated database server you may set this
# parameter up to 80% of the machine physical memory size. Do not set it
# too large, though, because competition of the physical memory may
# cause paging in the operating system.  Note that on 32bit systems you
# might be limited to 2-3.5G of user level memory per process, so do not
# set it too high.
innodb_buffer_pool_size=40M
# Size of each log file in a log group. You should set the combined size
# of log files to about 25%-100% of your buffer pool size to avoid
# unneeded buffer pool flush activity on log file overwrite. However,
# note that a larger logfile size will increase the time needed for the
# recovery process.
innodb_log_file_size=20M
# Number of threads allowed inside the InnoDB kernel. The optimal value
# depends highly on the application, hardware as well as the OS
# scheduler properties. A too high value may lead to thread thrashing.
innodb_thread_concurrency=8
log-error=D:/__dev/mysql-5.6.12-win32/err.log
log=D:/__dev/mysql-5.6.12-win32/log.log

配置文件my-default.ini见附件下载,下载之后去掉后缀名(.txt).

本文出自 “野马红尘” 博客,谢绝转载!

© 著作权归作者所有

secondriver
粉丝 10
博文 229
码字总数 233821
作品 0
广州
程序员
私信 提问
读官方指南经历Mysql5.6服务安装

上一次安装完成Mysql5.6服务,一段时间后发生异常,Mysql服务无法启动进程终止: 1067;网上找了好多方法还是没能解决这个问题,今天重新安装Mysql5.6,同样出现这个问题,后来通过阅读 MySQ...

技术小阿哥
2017/11/14
0
0
win2008 r2 服务器php+mysql+sqlserver2008运行环境配置(从安装、优化、安全等)

win2008 r2 安装 http://www.jb51.net/article/38048.htm iis的安装 http://www.jb51.net/article/86390.htm php的安装注意事项: 下载非安全线程 版本 nts php 5.2.17 http://www.jb51.net......

Marhal
2017/10/20
49
0
MMM架构实现MySQL高可用读写分离(进阶版,包含Amoeba)

前两天逛博客偶然发现了某大神写的关于MMM的文章,看完就迫不及待的自己试了一下,大神写的很顺畅,以为自己也能操作的很顺畅,但是实际情况是手脚太不麻利,碰到很多坑,如果大神的文章是“...

奋斗的寒霜
2018/07/19
0
0
同一服务器上二进制安装mysql5.7和mysql5.6

一、二进制包与源码包的区别 二进制包和源码包是软件包的两种形式。源码包里面包含程序原始的代码,需要在计算机上进行编译后才可以产生可运行程序,所以源码安装时间会比较长;而二进制包里...

江雪月青
01/04
0
0
pxc集群安装设置并使用mycat代理pxc集群

pxc集群安装设置 上pxc的原因:之前使用mycat代理了一主一从两个mysql做的读写分离(可以看该专题之前的几篇文章),后来发现因为主从同步的时延原因,删除了几篇文章并且刷新页面之后还能看到...

肥肥小浣熊
2018/08/05
0
0

没有更多内容

加载失败,请刷新页面

加载更多

OpenStack 简介和几种安装方式总结

OpenStack :是一个由NASA和Rackspace合作研发并发起的,以Apache许可证授权的自由软件和开放源代码项目。项目目标是提供实施简单、可大规模扩展、丰富、标准统一的云计算管理平台。OpenSta...

小海bug
今天
5
0
DDD(五)

1、引言 之前学习了解了DDD中实体这一概念,那么接下来需要了解的就是值对象、唯一标识。值对象,值就是数字1、2、3,字符串“1”,“2”,“3”,值时对象的特征,对象是一个事物的具体描述...

MrYuZixian
今天
6
0
数据库中间件MyCat

什么是MyCat? 查看官网的介绍是这样说的 一个彻底开源的,面向企业应用开发的大数据库集群 支持事务、ACID、可以替代MySQL的加强版数据库 一个可以视为MySQL集群的企业级数据库,用来替代昂贵...

沉浮_
今天
4
0
解决Mac下VSCode打开zsh乱码

1.乱码问题 iTerm2终端使用Zsh,并且配置Zsh主题,该主题主题需要安装字体来支持箭头效果,在iTerm2中设置这个字体,但是VSCode里这个箭头还是显示乱码。 iTerm2展示如下: VSCode展示如下: 2...

HelloDeveloper
今天
7
0
常用物流快递单号查询接口种类及对接方法

目前快递查询接口有两种方式可以对接,一是和顺丰、圆通、中通、天天、韵达、德邦这些快递公司一一对接接口,二是和快递鸟这样第三方集成接口一次性对接多家常用快递。第一种耗费时间长,但是...

程序的小猿
今天
8
0

没有更多内容

加载失败,请刷新页面

加载更多

返回顶部
顶部